GE 131-10595-2 1-07 JR Installation Instructions Manual

Also see for JDP39: Use and care guide Owner's manual Owner's manual Owner's manual Owner's manual

Contents

GE 131-10595-2 1-07 JR Installation Instructions Manual Manual pdf 9 page image

Select the proper position for the countertopthickness and move bracket to proper position.(Unit is supplied with bracket in position 1.)INSTALL THE RANGEINSTALLING THE ANTI-TIPBRACKETThe anti-tip bracket is attached to the back ofthe Drop-In Range. It is designed to fit underthe bottom of the countertop opening at therear. Measure counter thickness at back ofcutout to determine correct bracket location.11 For 3/4” Counter2 For 1.18” (3 cm) Counter3 For 1.5” Counter4 For 3.5”5 Alternate(shown below)Anti-tip bracket location(rear of range)CooktopANTI-TIP INSTALLATIONALTERNATEANTI-TIP INSTALLATIONInterior wall1/4” min. flat area Wall studCountertopthicknessBottom ofcountertopWire coverMaintopAnti-tipbracketBottom ofcountertopto engagebracket by1/2” min. Wall stud10-3/8”1-1/2”CountertopsurfaceInterior wallWirecoverAttachmentanchored towall stud isrequiredAnti-tip bracketAttachmentNon-kit applicationMaintopPosition #5non-kitapplication*Attachmentto engagebracket by 1/2” min.9Installation Instructions