GE 14 Use And Installation Manual

Also see for TOP-FREEZER 16: Owner's manual Owner's manual Use and care guide with installation instructions Owner's manual Use and care guide

Contents

15e. Attach thehandle to the rightedge of the doorwith screws at topand bottom, usingbottom holesvacated byremoval of thedoor stop screws.2. Transfer the door stop.• Move the metal door stop from the right endto the left end. Use a Torxdriver.• Move any screws from the left end to theright end.When reinstalling the fresh food door handle…a. Attach the handle to the right side of the doorwith screws at the top and under the handle plug.b. Reinstall the handle plug.3. Transfer the freezer door handle tothe right.a. Remove the screw holding the handle to thetop of the door and the two screws holding thehandle to the bottom of the door.b. Remove the handle.c. Remove the screw from the right top edge ofthe door and insert it into the handle screw holeon the left side.d. Transfer the door stop as shown at left.TOPBOTTOMREHANG FRESH FOOD DOOR.a. Lower the bottomsocket of the freshfood door onto thepin on the bottomhinge. Be sure theplastic washer is inplace on the pin.b. Insert the pin onthe center hinge intothe socket in the topof the door. NOTE:The center hinge mustbe turned over asshown when mountedon the left side.c. Tilt the door towardthe cabinet. As thedoor is brought intoposition, slide the hinge under the head of thescrew which earlier had been partly driven intothe outermost hole. Insert the remaining screw,then tighten both screws securely.5Plastic WasherPlastic WasherHingePinHingePinLEFT SIDERIGHT SIDEDoor Stop