GE 164D4290P075-1 Owner's Manual

GE 164D4290P075-1 Owner's Manual Manual pdf 26 page image

26Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety InstructionsUsing the self-cleaning oven.The oven door must be closed and all controls set correctly for the cycle to work properly.How to Delay the Start of CleaningMake sure the clock shows the correcttime of day.Touch theSELF CLEAN pad.Using the number pads, enter thedesired clean time.Touch theDELAY START pad. Theearliest start time you can set willappear in the display.Using the number pads, enter thetime of day you want the clean cycleto start.Touch theSTART pad.The door locks automatically. Thedisplay will show the start time. It willnot be possible to open the oven dooruntil the temperature drops below thelock temperature and theLOCKED doorlight goes off.When theLOCKED door light is off, openthe door.After a Clean CycleYou may notice some white ash in theoven. Wipe it up with a damp cloth afterthe oven cools.If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with avinegar and water mixture.These deposits are usually a salt residuethat cannot be removed by the clean cycle.If the oven is not clean after one cleancycle, repeat the cycle.Apply a small amount of vegetable oil toa paper towel and wipe the edges of theoven shelves with the paper towel. Do notspray with Pam® or other lubricant sprays.n You cannot set the oven for cookinguntil the oven is cool enough for thedoor to unlock.n While the oven is self-cleaning, youcan touch theCLOCK pad to displaythe time of day. To return to theclean countdown, touch theCOOKINGTIME pad.