GE 17 Owner's Manual And Installation Instructions

Also see for TOP-FREEZER 16: Owner's manual Owner's manual Use and installation guide Use and care guide with installation instructions Owner's manual

Contents

GE 17 Owner's Manual And Installation Instructions Manual pdf 5 page image

About the fresh food compartment shelves.About the temperature control dial. GEAppliances.comShelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.Full-Width ShelvesSome models have a stationary temperedglass shelf, a spillproof shelf, or two steelwire stationary shelves. These shelves canbe moved to another place in the fresh foodcompartment.When placed correctly on the shelf supports,the shelf will stop before coming completelyout of the refrigerator and will not tilt whenyou place food on it or remove food from it.Half-Width ShelvesOne end of the shelf rests on a molded side-wallsupport; a bracket on the other end hooks intoa track on the rear cabinet wall.To remove, lift the shelf up at front, then off thesupport and out of the track.To replace, select desired shelf height. Withshelf front raised slightly, hook the bracket’s toplug into the track, then lower the shelf onto thesupport.NOTE: The shelf to the right of the track isdesigned to hook into the right-hand slot; theshelf to the left is designedto hook into the left-handslot.2 Lift up and out1 Tilt upTo remove a full-width shelf when thefresh food compartment door cannotbe opened fullyLift rearPull forward and downLift rearPull forwardTo remove the full-width shelves5Turning the dial to OFF stops cooling in both compartments—fresh food and freezer. It does not shut off power tothe refrigerator.Temperature Control Dial (on some models)The temperature control dial adjust refrigerator from warmest to coldest.The recommended factory setting is shown in illustration to the left. For coldertemperature turn dial clockwise toward snowflake. For warmer temperature turndial counter clockwise away from snowflake. allow 24 hours for adjustment.OFFOFFOFFOFFOFFOFFOFFOFFOFFRecommenedfactory setting Coldest setting Warmest settingOFFOFFOFF