Customer Service Troubleshooting TipsOperating Instructions Safety InstructionsInstallation InstructionsCustomer Service Troubleshooting Tips Installation InstructionsSafety InstructionsOperating InstructionsCustomer Service Troubleshooting Tips Installation InstructionsSafety InstructionsOperating InstructionsAbout the controls on the refrigerator.8What the Codes MeanCheck your frozen food. Has any of it started to thaw? A package may be holding the freezercompartment door open. Don’t open the door more often than absolutely necessary whilethis code is displayed. TouchingSYSTEM CHECK-RESET after the freezer compartment tem-perature has returned to normal will erase the code.Power to the refrigerator has been interrupted for more than two seconds. Check the conditionof food in both the fresh food and freezer compartments. TouchSYSTEM CHECK-RESETto erase the code.There is no fault with the refrigerator when thePF code flashes.Check the icemaker. Ice clumps in the storage bin may have stalled the icemaker. Follow cor-rective measures described inTroubleshooting Tips. If water supply to the icemaker isnot connected or not turned on, make sure the icemaker feeler arm is in theSTOP (up)position. The code stops flashing when problem is corrected orSYSTEM CHECK-RESETis touched.Something is wrong with the defrost system—keep doors closed to retain cold and call for serv-ice. The code flashes until problem is corrected.DISPLAY