26 49-60646-6Installation InstructionsINSTALLING THE REFRIGERATOR (Cont.)CONNECTING THEREFRIGERATOR TO THE HOUSEWATER LINE(icemaker and dispenser models)A cold water supply is required for automaticLFHPDNHUDQGGLVSHQVHURSHUDWLRQ,IWKHUHLVnot a cold water supply, you will need to provideRQH6HH³,QVWDOOLQJWKH:DWHU/LQH´VHFWLRQNOTES:• Before making the connection to therefrigerator, be sure the refrigerator powercord is not plugged into the wall outlet.,I\RXUUHIULJHUDWRUGRHVQRWKDYHDZDWHUILOWHUwe recommend installing one if your watersupply has sand or particles that could clogthe screen of the refrigerator’s water valve.,QVWDOOLWLQWKHZDWHUOLQHQHDUWKHUHIULJHUDWRU,IXVLQJ6PDUW&RQQHFW Refrigerator7XELQJ.LW\RXZLOOQHHGDQDGGLWLRQDOWXEH:;; WRFRQQHFWWKHILOWHU'RQRWFXWplastic tube to install filter.,I\RXDUHXVLQJFRSSHUWXELQJSODFHDcompression nut and ferrule (sleeve) onto theend of the tubing coming from the house coldwater supply.,I\RXDUHXVLQJWKH6PDUW&RQQHFW tubing, thenuts are already assembled to the tubing.,I\RXDUHXVLQJFRSSHUWXELQJLQVHUWWKHHQGof the tubing into the refrigerator connection, atthe back of the refrigerator, as far as possible.While holding the tubing, tighten the fitting.,I\RXDUHXVLQJ6PDUW&RQQHFW tubing,insert the molded end of the tubing into therefrigerator connection, at the back of therefrigerator, and tighten the compression nutuntil it is hand tight. Then tighten one additionalturn with a wrench. Overtightening may causeleaks.WARNINGConnect to potable water supply only.A cold water supply is required for automaticicemaker operation. The water pressuremust be between 40 and 120 psi (275-827kilopascals).WARNING ELECTRIC SHOCKHAZARDAttach tubing clamp using existing hole only.DO NOT drill into the refrigerator.1AB)DVWHQWKHWXELQJLQWRWKHFODPSSURYLGHGWRhold it in position. You may need to pry openthe clamp.´7XELQJTubing Clamp´Compression Nut)HUUXOH(sleeve)SmartConnect TubingRefrigeratorConnectionCTURN ON THE WATER SUPPLYTurn the water on at theshutoff valve (house watersupply) and check for anyleaks.2PLUG IN THE REFRIGERATORBefore plugging in therefrigerator, make sure theicemaker power switch is set toWKH2))SRVLWLRQSee the grounding informationattached to the power cord.3Option 2Option 3INSTALLATION INSTRUCTIONS6PDUW&RQQHFWTubingRefrigeratorConnection