GE 23 Manual

Also see for 25: Owners and installation manual Owner's manual Owner's manual Use and care & installation guide Use and care & installation guide

Contents

70DIMENSIONS AND SPECIFICATIONS(for 23‘ CustomStyle™ models)DIMENSIONS AND SPECIFICATIONSInstallation InstructionsINSTALLING THE REFRIGERATORREFRIGERATOR LOCATION• Do not install the refrigerator where thetemperature will go below 60°F (16°C)because it will not run often enough tomaintain proper temperatures.• Do not install the refrigerator where thetemperature will go above 100°F (37°C)because it will not perform properly.• Install it on a floor strong enough tosupport it fully loaded.CLEARANCESAllow the following clearances for easeof installation, proper air circulation andplumbing and electrical connections:23‘ (33” wide),23‘/25‘ CustomStyle™ 25‘, 26‘, 27‘, 29‘Sides 1/8" (4 mm) 1/8" (4 mm)Top 1" (25 mm) 1" (25 mm)Back 1/2" (13 mm) 1" (25 mm)701⁄4"(178.4 cm)36"(91.4 cm)24"(61 cm)24"(61 cm)CabinetWater Electrical3/4"(19 mm) Airspace(1/2"[13 mm] Gap +1/4"[6 mm] Wall Plates) 25"(63.5 cm)CountertopDIMENSIONS AND SPECIFICATIONS(for 25‘ CustomStyle™ models)*72 1/4" (183.5 cm) required for full adjustmentof mobility wheels. If cabinets installedabove refrigerator have doors that areflush to the top of the opening for therefrigerator, then an additional 1/8" may berequired to provide clearance for cabinetdoors to open freely.36"(91.4 cm)24"(61 cm)721⁄4"(183.5 cm)*71.0625" (180.5 cm)