10Customer Service Troubleshooting TipsOperating Instructions Safety InstructionsInstallation InstructionsCustomer Service Troubleshooting Tips Installation InstructionsSafety InstructionsOperating InstructionsCustomer Service Troubleshooting Tips Installation InstructionsSafety InstructionsOperating InstructionsAutomatic Icemaker (on some models)The icemaker will produce eight cubes percycle—approximately 100 cubes in a 24-hourperiod, depending on freezer compartmenttemperature, room temperature, numberof door openings and other use conditions.If the refrigerator is operated before thewater connection is made to the icemaker,keep the feeler arm in theSTOP (up)position.When the refrigerator has been connectedto the water supply, move the feeler arm totheON (down) position.The icemaker will fill with water when itcools to freezing. A newly-installedrefrigerator may take 8 to 12 hours tobegin making ice cubes.Throw away the first few batches of ice toallow the water line to clear.Be sure nothing interferes with the swing ofthe feeler arm.It is normal for several cubes to be joinedtogether.If ice is not used frequently, old ice cubeswill become cloudy and taste stale.About the automatic icemaker.A newly-installed refrigerator may take 8 to 12 hours to begin making ice.IcemakerIce Storage BinFeeler armin theSTOP(up) positionFeeler armin theON(down) positionIcemaker Accessory KitIf your refrigerator did not already comeequipped with an automatic icemaker,an icemaker accessory kit is available atextra cost.Check the back of the refrigeratorfor the specific icemaker kit needed foryour model.Feeler arm in theSTOP (up) positionFeeler arm on the dispenser model.