GE 29267 User Manual

Also see for 29267: User guide User guide

C HAIN D IALINGThis process allows you to dial a succession of stored numbers from separatememory locations. This is useful when you must dial several sequences of numbers,such as with frequent calls via a telephone company long distance provider.For exampleMemory locationLocal access number of long distance company 6Authorization code (ID) 7Long distance phone number 81. Pick up the handset.2. Press mem button, then press number “6” for the memory location.3. Press mem button, then press number “7” for the memory location.4. Press mem button, then press number “8” for the memory location.5. The number dials automatically.USING F LASHThis feature is used to activate customer calling services available through your localphone company, such as Call Waiting. These services generally require an extra monthlyfee. If you subscribe to any of these services, please refer to the phone company’sinstructions on how to use flash.To answer an incoming call while having a conversation:• After you hear the Call Waiting tone, press and release the flash button. The firstcall is placed on hold while the second call can be answered.To return to your first call and put the second call on hold:• Press and release flash again. The first call can continue while the second call isput on hold.USING T EMPORARY T ONE D IALINGIf you have pulse service, you can temporarily change from pulse to tone service.After dialing the telephone number, press and release the *TONE button on thetelephone. This allows access to phone services that require a tone, such as bankingand long-distance services. After you hang up the handset, the telephoneautomatically returns to pulse service.C ALLER ID (CID) F EATURESS UMMARY S CREENThe Summary Screen shows the current time, current date, and number of new callsto be reviewed. It displays until any button is pressed. Within 60 seconds ofreceiving a new call, the Summary Screen displays.NOTE: The number of new calls shows in the display until all new calls arereviewed.R ECEIVING AND STORING CID R ECORDSThis unit receives and displays CID information transmitted by your local phone company.This information can include the phone number, date, and time; or the name, phonenumber, date, and time. The unit stores up to 50 call records for later review. When thememory is full, a new call record automatically replaces the oldest call record in memory.NEW shows in the display for call records received which have not been reviewed.R EVIEWING CID RECORDS• Press either the (+) or (-) down button to view the newest call record.• Press the (-) button to scroll through the call records from the most recent tothe oldest.• Press the (+) button to scroll through the call records from the oldest to thenewest.• When all of the messages have been viewed,START/END appears in the display.DELETING CID RECORDS• To delete the record showing in the display, press the delete button once.• To delete all records while reviewing, press and hold the delete button untilERASE ALL? shows in the display.DIALING BACKWhen reviewing Caller ID records, you may dialback the phone numbers shown onthe display by pressing the dial button.IF YOU PROGRAMMED YOUR LOCAL AREA CODE IN THE SETUP MENU1. Use the (+) and (-) buttons to scroll to the number you want to dial.• If you see a number with 7 digits (i.e. 555-1234), then the call was received fromwithin your area code. However, this does not guarantee the call is a local call.• If you see a number with 11 digits (i.e. 1-234-555-1234), then the call received was notfrom your area code.2. Press the dial button and the display showsPICKUP orADJ. A 10 second timeralso starts in the upper right side of the display, letting you know the timeremaining until the unit returns to the Summary Screen. If you adjust the numberto be dialed, the timer automatically resets itself.3. To adjust the phone number, press the dial button. For instance, a 7-digitlocal number sometimes cannot be dialed because it requires a 10-digit or11-digit format. Press the dial button repeatedly to scroll through the 7, 10,and 11-digit numbers.7-digits: 7-digit telephone number (i.e. 555-5555)10-digits: 3-digit area code + 7-digit telephone number (i.e. 425-555-5555)11-digits: long distance code 1 + 3-digit area code + 7-digit telephonenumber (i.e. 1-425-555-5555)4. To dial the displayed number, pick up the handset before the timer reaches 0.NOW DIALING shows in the display and the number is dialed.IF YOU DID NOT PROGRAM YOUR LOCAL AREA CODE IN THE SETUP MENU1. Use the (+) and (-) buttons to display the number you want to dial. You willonly see 10-digit numbers (i.e. 234-555-1234).2. See steps 2 through 4 in the above section to complete the dialback sequence.NOTE: IF PICKUP PHONE shows on the display, no other changes to thenumber can be made. The information sent from the telephone company isknown to be a valid number to dial back (available only in limited areas). Onceyou pickup the phone, the number is automatically dialed.29267We bring good things to life.Trimline Memory Phonewith Call Waiting Caller IDUser's GuideEQUIPMENT A PPROVAL I NFORMATIONYour telephone equipment is approved for connection to the Public Switched Telephone Network andis in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements forTelephone Terminal Equipment published by ACTA.1 Notification to the Local Telephone CompanyOn the bottom of this equipment is a label indicating, among other information, the US numberand Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide thisinformation to your telephone company.The REN is useful in determining the number of devices you may connect to your telephone lineand still have all of these devices ring when your telephone number is called. In most (but not all)areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain ofthe number of devices you may connect to your line as determined by the REN, you should contactyour local telephone company.A plug and jack used to connect this equipment to the premises wiring and telephone networkmust comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. Acompliant telephone cord and modular plug is provided with this product. It is designed to beconnected to a compatible modular jack that is also compliant. See installation instructions fordetails.Notes• This equipment may not be used on coin service provided by the telephone company.• Party lines are subject to state tariffs, and therefore, you may not be able to use your owntelephone equipment if you are on a party line. Check with your local telephone company.• Notice must be given to the telephone company upon permanent disconnection of yourtelephone from your line.• If your home has specially wired alarm equipment connected to the telephone line, ensure theinstallation of this product does not disable your alarm equipment. If you have questions aboutwhat will disable alarm equipment, consult your telephone company or a qualified installer.2 Rights of the Telephone CompanyShould your equipment cause trouble on your line which may harm the telephone network, thetelephone company shall, where practicable, notify you that temporary discontinuance of servicemay be required. Where prior notice is not practicable and the circumstances warrant such action,the telephone company may temporarily discontinue service immediately. In case of suchtemporary discontinuance, the telephone company must: (1) promptly notify you of suchtemporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) informyou of your right to bring a complaint to the Commission pursuant to procedures set forth inSubpart E of Part 68, FCC Rules and Regulations.The telephone company may make changes in its communications facilities, equipment, operations orprocedures where such action is required in the operation of its business and not inconsistent withFCC Rules and Regulations. If these changes are expected to affect the use or performance of yourtelephone equipment, the telephone company must give you adequate notice, in writing, to allow youto maintain uninterrupted service.INTERFERENCE INFORMATIONThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving”the interference).• Reorient or relocate and increase the separation between the telecommunications equipment andreceiving antenna.• Connect the telecommunications equipment into an outlet on a circuit different from thatto which the receiving antenna is connected.If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission hasprepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This booklet isavailable from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number004-000-00345-4 when ordering copies.US NUMBER IS LOCATED ON THE CABINET BOTTOMREN NUMBER IS LOCATED ON THE CABINET BOTTOMINTRODUCTIONCAUTION: When using telephone equipment, there are basic safetyinstructions that should always be followed. Refer to the IMPORTANTSAFETY INSTRUCTIONS provided with this product and save them forfuture reference.Your Caller ID phone stores and displays specific information, provided by your localtelephone company, to subscribers of Caller ID or similar caller identification services.Your Caller ID phone enables you to:• Identify callers before you answer the phone.• View the time and date of each incoming call.• Record up to 50 Caller ID messages sequentially.• Know who called while you were away.To get the most from your new phone, we suggest that you take a few minutes right nowto read through this user’s guide.IMPORTANT: In order to use all the features of this unit, you must subscribe to thestandard Name/Number Caller ID Service or Call Waiting Caller ID Serviceavailable from your local telephone company. To know who is calling while you areon the phone, you must subscribe to Call Waiting Caller ID Service.Base HandsetB EFORE Y OU B EGINP ARTS CHECKLISTMake sure your package includes the following items:T/P D IAL M ODEThis adjustment allows you to select tone (touch-tone) or pulse (rotary) dialing.1. Press the options button untilSET OR appears.2. Press the (+) button untilT/P DIAL MODE appears in the display.3. Press the options button to show the current dial mode. The default is set to tone.4. To change the dialing mode, press the (+) or (-) button. The display willalternate between the two dialing modes.5. Press the options button to store the dialing mode and return to theT/P DIALMODE display.EXIT SETUPTo immediately exit the setup mode, select theEXIT SETUP menu and press theoptions button.REMINDER: The time and date is programmed automatically when the firstCaller ID record is successfully received after the unit is setup.TELEPHONE BASICSADJUSTING THE VOLUMEYou may control the listening level with the VOLUME switch, which has three levels.It remains at the last level set until you change it.REDIALING A NUMBERIf you want to call the last number you dialed again (up to 32 digits), use theredial feature.1. Pick up the handset.2. Press the redial button.3. The last number called is automatically redialed.U SING ONE T OUCH R EDIALIf the last call you dialed was busy, you can redial it immediately by just pressingthe redial button and without hanging up the handset.MEMORYBefore you store a telephone number in memory, make sure the dialing mode iscorrectly set for the type of service you have. The default dialing mode is tone(touch-tone), so if you have pulse (rotary) service, you must first change the dialingmode. See “To Set the Dial Mode.” The following buttons can be stored into anymemory location: 0-9.STORING F REQUENTLY C ALLED NUMBERS1. Pick up the handset.2. Press the store button.3. Push the desired memory location button.4. Press the store button.5. Use the handset number keys to enter the telephone number (up to 16-digits)and press the store button.6. Hang up the handset.NOTE: If you make a mistake, use the delete button to delete wrong digits.C HANGING A S TORED NUMBERRepeat the storage sequence above. The new number replaces the old number atthe memory location.ERASING A STORED N UMBER1. Pick up the handset.2. Press the store button.3. Press the memory location (0-9) to be erased.4. Press delete for three seconds until the number in the display is erased.5. Hang up the handset.DIALING FREQUENTLY C ALLED NUMBERS1. Pick up the handset and press the mem button.2. Press 0-9 for the memory location. The number dials automatically.OR1. Pick up the handset and press the dial button.2. Press the review button for the desired memory location.3. Press the dial button to dial the number.OR1. Press dial button while the handset is still in the cradle.2. Press the review button for the desired memory location, lift the handset and thenumber dials automatically.R EVIEWING NUMBERS S TORED IN M EMORY1. Press the store button.2. Press 0-9 for the memory location. The number shows on the display.C OPY CALLER ID MEMORY TO USER MEMORY1. Pickup the handset.2. Press either review ( or ) button to display the number you want to copy.3. Press the store button.4. Press 0-9 for the memory location. The display flashes if the memory location isoccupied.5. Press the store button twice to replace the new information with the old, or presseither review ( or ) button to select an empty location. The number isautomatically stored.6. Press the hook switch to exit.C OPY REDIAL MEMORY TO USER MEMORY1. Pickup the handset.2. Press store.3. Press 0-9 for the memory location. The display flashes if the memory location isoccupied. Press either review ( or ) button to select a different location. Thedisplay flashes if the memory location is occupied.4. Press the store button again to confirm.5. Press the redial button, and then press the store button again.6. Press the flash button or the hook switch to exit.STORING A P AUSE IN MEMORYThe redial button has dual functionality. It becomes a pause button if the storebutton is pressed first. It is valid only when storing a number into memory. Use theredial button to insert a pause when a delay is needed in an automatic dialingsequence. For example, when you must dial a 9 to get an outside line, or when youenter codes to access your long distance company.You may need to adjust the length of the pause. It can be adjusted from 1 to 9 seconds.The default setting is 4 seconds.1. Pickup the handset.2. Press the store button.3. Press the redial button.4. Press 1-9 (1 = 1 second, 2 = 2 seconds, etc.)5. Press store again.6. Press the flash button or the hook switch to exit.Telephoneline jackWall plateabc2jkl5tuv8def3mno6wxyz91ghi4pqrs7oper0 #tone*mem redialstoreflashModel 29267B16258160 (Rev. 1 E/S)03-23Printed in ChinaATLINKS USA, Inc.101 West 103rd StreetIndianapolis, IN 46290© 2003 ATLINKS USA, Inc.Trademark(s) ® RegisteredMarca(s) Registrada(s)SEE MARKING ON BOTTOM / BACK OF PRODUCTRISK OF ELECTRIC SHOCKDO NOT OPENWARNING: TOPREVENT FIRE ORELECTRICAL SHOCKHAZARD, DO NOTEXPOSE THISPRODUCT TO RAINOR MOISTURE.THE LIGHTNINGFLASH AND ARROWHEAD WITHIN THETRIANGLE IS AWARNING SIGNALERTING YOU OF“DANGEROUSVOLTAGE” INSIDETHE PRODUCT.CAUTION: TO REDUCE THERISK OF ELECTRIC SHOCK, DONOT REMOVE COVER (ORBACK). NO USERSERVICEABLE PARTS INSIDE.REFER SERVICING TOQUALIFIED SERVICEPERSONNEL.THE EXCLAMATIONPOINT WITHIN THETRIANGLE IS AWARNING SIGNALERTING YOU OFIMPORTANTINSTRUCTIONSACCOMPANYINGTHE PRODUCT.CAUTION:T ELEPHONE J ACK R EQUIREMENTSTo use this phone, you need an RJ11C type modulartelephone jack, which might look like the one picturedhere, installed in your home. If you don’t have a modularjack, call your local phone company to find out how to getone installed.IMPORTANT INSTALLATION I NFORMATIONCAUTION: Disconnect the phone cord from the wall outletbefore installing or replacing the batteries.• Never install telephone wiring during a lightning storm.• Never touch non-insulated telephone wires or terminals, unless the telephone linehas been disconnected at the network interface.• Use caution when installing or modifying telephone lines.• Never install telephone jacks in wet locations unless the jack is specificallydesigned for wet locations.I NSTALLING THE BATTERIESIMPORTANT: You will have approximately 60 seconds to replace thebatteries before the memories stored in the handset are lost. Please readthe instructions before replacing the batteries and have the batteries readyto be inserted beforehand. As a precaution, you may want to write downany stored information you do not want erased.Your Caller ID phone uses 4 AA-size alkaline batteries for receiving and storing CallerID records and for the numbers you use for memory dialing.1. If both the straight and coiled line cords are already connected, disconnect themfrom the base unit. Place the handset aside.2. Use a ballpoint pen or other tool to open the battery compartment door.3. Insert 4 AA-size alkaline batteries (not included) as shown on the diagram insidethe compartment.4. Replace the battery compartment door.5. Re-attach the line cords to the unit and check your memory locations. If installation takeslonger than 90 seconds, you should re-set your memory locations.IMPORTANT: If you’re not going to use the telephone for more than 30 days,remove the batteries because they can leak and damage the unit.INSTALLING THE PHONEChoose the best location to install your telephone. Your telephone should be placed on alevel surface, such as a desk or table top, or you may mount it on the wall.C ONNECTING THE T ELEPHONE L INE1. Plug the coiled cord into the jack on the handset.2. Plug the long straight line cord into a modular wall telephone jack.3. Set the RINGER switch on the base to HI.= HI - Sound will be loudest.= LOW - Sound will be lower.= OFF - Telephone will not ring.4. Place the handset in the cradle.NOTE: The unit is properly installed if you pick up the handset and hear thedial tone. Otherwise, recheck all the installation steps.W ALLMOUNTING THE P HONEYour telephone may also be mounted on the wall (wall plate not included).NOTE: To prevent the handset from falling out of the cradle while the phone ishanging on the wall, you must reverse the handset hook (located on the base).Battery compartment1. Push the handset hook up and out with yourthumb, turn it over, and replace it in the slot onthe base.2. Plug one end of the straight telephone line cordinto the jack on the bottom of the base.3. Feed the line cord through the groove and wrapthe cord around the track on the bottom of thebase.4. Feed the line cord through the groove on theopposite side of the track, and plug the end intothe modular telephone jack.5. Slip the mounting holes (on the bottom of thebase) over the wall plate posts and firmly slide theunit down into place.HANDSET LAYOUTS ETTING UP THE C ALLER ID MENUIMPORTANT: Do not plug the telephone into the wall jack while setting up the CallerID menu because an incoming call may invalidate the information not yet saved.1. Place the handset in the cradle on the base.2. Press the options button.SET OR appears in the display.3. Press either REVIEW up or down button to scroll among the 7 menu screens,which are:•SET OR •LOCAL AREA CODE (default - - -)•REGIONAL AC’s-1 (default - - - - - - - - -)•CID LANGUAGE (default English)•SELECT CONTRAST (default 3)•T/P DIAL MODE (default tone)•EXIT SETUPNOTE: You may press dial anytime to exit the Caller ID Set Up menu.If no buttons are pressed within 10 seconds, the phone automatically existsthe Caller ID Set Up menu and returns to the NO CALLS summary screen.L OCAL A REA C ODEThe telephone uses the programmed area code to determine thenumber format to display when a valid Caller ID signal is received.It is also used for the Dialback feature.1. Press the options button.SET OR appears in the display.2. Press the (+) button untilLOCAL AREA CODE:_ _ _ appears in thedisplay.3. To enter or change the area code, press the options button. Thedisplay shows the area code stored in memory. The left-most digit, ora minus sign (-) flashes, indicating the unit is ready to accept the areacode entry.4. Press (-) and select a number from 9-0 for the first digit.5. When the desired digit is flashing, press (+) to advance to thenext digit.6. Repeat steps 4 and 5 until all the digits for your area code are correct.NOTE: If you make a mistake, you can simply repeat the previous steps untilyour area code is set.7. Press options to store the area code and return to theLOCAL AREACODE display.R EGIONAL AREA CODES FOR 10-DIGIT D IALINGLike the Local Area Code, the telephone uses the programmed area codes todetermine the number format to display when a valid Caller ID signal is received.Calls that match any of the programmed regional area codes are displayed as 10digits. This is helpful in areas that have multiple or overlapping area codes andrequire 10-digit dialing.1. Press the options button.SET OR appears in the display.2. Press the (+) button untilREGIONAL AC’S-1: _ _ _ _ _ _ _ _ _ shows in thedisplay.3. To enter or change the area code, press the options button. The display showsthe area code stored in memory. The left-most digit, or minus sign (-), flashes,indicating the unit is ready to accept the area code entry.4. Press the (-) button, and select a number from 9-0 for the first digit of thearea code.5. When the desired digit is flashing, press the (+) button to advance to thenext digit.6. Press the options button again to enter the next three-digit regional area code andrepeat steps 4 and 5 until all the REGIONAL AC'S-1 (RAC#1) and REGIONAL AC'S-2(RAC#1) are entered. A total of 6 sets of Regional Area Codes may be entered.7. Press the options button to store the setting and return to theREGIONALAREA CODE display.8. Press dial to exit.CID LANGUAGEThis setting allows you to display Caller ID messages in English, French or Spanish.1. Press the options button.SET OR appears in the display.2. Press the (+) button untilCID LANGUAGE appears in the display.3. Press the options button to show the current language setting. The default is English.4. Press the (+) or (-) button to change the language.5. Press options to store the language and return to theCID LANGUAGE display.SELECT C ONTRASTThis adjustment allows you to adjust the contrast and viewing angle of the display.1. Press the options button untilSET OR appears.2. Press the (+) button untilSELECT CONTRAST appears in the display.3. Press the options button to show the current contrast setting. There are 5 levelsof contrast, with the default set to 3.4. To decrease the contrast, press (-). To increase the contrast, press (+).5. Press the options button to store the contrast setting and return to theSELECT CONTRAST display.abc2jkl5tuv8def3mno6wxyz91ghi4pqrs7oper0 #tone*mem redialstoreflash+-deleteoptionsdialstore buttonoptionsbuttondelete buttondisplaydial buttonvolumeswitcharrow buttonsredial buttonflash buttonmem buttonCALLER ID D ISPLAY MESSAGESThe following special messages indicate the status of a message or the unit:NO CALLS The caller memory is empty.UNKNOWN CALLER The incoming call does not have Caller ID service ortheir service area is not linked to yours. IfUNKNOWNCALLER appears along with a calling number, the nameinformation for that number is not available.Battery power level is low. Please replace the batteriesas soon as possible in order to maintain Caller ID operation.BLOCKED CALL The incoming caller is registered as “Private Number” andCaller ID information is withheld.START/END You are at the beginning or the end of the Caller IDmemory log.CALL WAITING If you subscribe to Call Waiting Caller ID Service,this icon flashes when you receive a call while you areon the phone.TROUBLESHOOTING TIPSNO DIAL TONE• Check all cabling to make sure that all connections are secure and not damaged.• Check the hook switch: Does it fully extend when handset is lifted from cradle?NO DISPLAY• Replace batteries.• Make sure the batteries are properly installed.NO INFORMATION IS SHOWN AFTER THE PHONE RINGS• In order to receive Caller ID records, you must subscribe to the standard nameand number Caller ID service available through your local telephone company.• Be sure to wait until the second ring before answering.PHONE DOES NOT RING• Make sure ringer switch is set to HI.• You may have too many extension phones on your line. Unplug some extensionphones.• Check for a dial tone. If there is no dial tone see solutions for "No dial tone."OTHER PARTY CANNOT HEAR YOU• Make sure phone cord is securely plugged in.• Make sure extension phones are on the hook at the same time you're using thephone. It is normal for the volume to drop when additional extension phones areused at the same time.CANNOT DIAL OUT• Make sure the T/P dialing mode is set to the type of phone service you aresubscribed to.SERVICEIf trouble is experienced with this equipment, for repair or warranty information,please contact customer service at 1-800-448-0329. If the equipment is causing harmto the telephone network, the telephone company may request that you disconnectthe equipment until the problem is resolved.This product may be serviced only by the manufacturer or its authorized serviceagents. Changes or modifications not expressly approved by ATLINKS USA, Inc.could void the user’s authority to operate this product. For instructions on how toobtain service, refer to the warranty included in this guide or call customer serviceat 1-800-448-0329.Or refer inquiries to:ATLINKS USA, Inc.Manager, Consumer RelationsP O Box 1976Indianapolis, IN 46206Attach your sales receipt to the booklet for future reference or jot down the date thisproduct was purchased or received as a gift. This information will be valuable ifservice should be required during the warranty period.Purchase dateName of storeLIMITED WARRANTYWhat your warranty covers:• Defects in materials or workmanship.For how long after your purchase:• One year, from date of purchase.(The warranty period for rental units begins with the first rental or 45 days from date ofshipment to the rental firm, whichever comes first.)What we will do:• Provide you with a new or, at our option, a refurbished unit. The exchange unit is underwarranty for the remainder of the original product’s warranty period.How you get service:• Properly pack your unit. Include any cables, etc., which were originally provided with theproduct. We recommend using the original carton and packing materials.• ”Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that theproduct is within the warranty period, must be presented to obtain warranty service.” Forrental firms, proof of first rental is also required. Also print your name and address and adescription of the defect. Send via standard UPS or its equivalent to:ATLINKS USA, Inc.c/o ThomsonSocorro, Texas 79927• Pay any charges billed to you by the Exchange Center for service not covered by the warranty.• Insure your shipment for loss or damage. ATLINKS accepts no liability in case of damage orloss.• A new or refurbished unit will be shipped to you freight prepaid.What your warrantydoes not cover:• Customer instruction. (Your Owner’s Manual provides information regarding operating instructionsand user controls. Any additional information, should be obtained from your dealer.)• Installation and setup service adjustments.• Batteries.• Damage from misuse or neglect.• Products which have been modified or incorporated into other products.• Products purchased or serviced outside the USA.• Acts of nature, such as but not limited to lightning damage.Limitation of Warranty:• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALLOTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NOVERBAL OR WRITTEN INFORMATION GIVEN BY ATLINKS USA, INC., ITS AGENTS, OR EMPLOYEESSHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVEREMEDY OF THE CONSUMER. ATLINKS USA, INC. SHALL NOT BE LIABLE FOR INCIDENTALOR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISINGOUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THISDISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OFTHE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANYIMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ONTHIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.How state law relates to this warranty:• Some states do not allow the exclusion nor limitation of incidental or consequentialdamages, or limitations on how long an implied warranty lasts so the above limitations orexclusions may not apply to you.• This warranty gives you specific legal rights, and you also may have other rights that varyfrom state to state.If you purchased your product outside the USA:• This warranty does not apply. Contact your dealer for warranty information.CALL WAITINGSMITH JOHN1 - 3 1 5 - 5 5 5 - 1 2 3 4PMCurrent time Current dateCaller ID name Caller ID numberNew calls

/ 2

Related manuals for GE 29267