GE 36” Rangetop Installation Instructions Manual

Contents

12ZX12B30PSS, ZX12B36PSS, ZX12B48PSS Accessory Installation237,21$/$&&(6625,(6³” HIGH BACKSPLASHTOOLS AND MATERIALS REQUIRED• Gloves to protect against sharp edges• T-15 and #2 Phillips screwdrivers• Drill with 3/32” and 9/64” bits• Safety glasses• Level• PencilThis Kit Includes• Wall support panel• Cover panel• Hardware package with– 5 Stainless Steel Torx 15 #8 self-tapping screws– 5 Phillips #2 pan head wood #10 screwsWall SupportPanelHardwarePackageINSTALL 12” BACKSPLASHWARNING: This backsplash must besecurely fastened to the wall. Failure to doso could result in damage or personal injury.• Install and level the range or rangetop and therange hood according to the installation instructions.• Remove the backsplash packaging and protectivefilm.• Use a level to pencil a horizontal line on the wall,1/8” above the range or rangetop. The 1/8” gapallows the cover panel to overlap the wall supportpanel.• Locate wall studs on each side. Where studs are notavailable, plan to use wall anchors (not provided).• Align the wall support panel on the markedhorizontal line and centered left to right.• The wall support panel must be secured to the wallat all 4 corners. Use wood screws (provided) or wallanchors (not provided) to secure the support panelto the wall.• Place the cover panel over the wall support paneland secure with Torx screws (provided). Install 2screws on each side.Install 4Wood Screws1/8”Install T-15ScrewsWallSupportPanelWall SupportPanelCover PanelCover PanelWARNING:To prevent ignition of combustible materials,the entire back wall above the range must beprotected by a backsplash constructed of non-combustible material.This stainless steel backsplash accessory mustbe installed in combination with a custom, non-combustible backsplash built beyond the 12”height of the backsplash.BEFORE YOU BEGINRead these instructions completelyand carefully.IMPORTANT: Save these instructions for localinspector’s use.IMPORTANT: OBSERVE ALL GOVERNING CODESAND ORDINANCES.NOTE TO INSTALLER: Be sure to leave theseinstructions with the Consumer.NOTE TO CONSUMER: Keep these instructionswith your Owner’s Manual for future reference.This kit provides for the installation of a 12”high backsplash for 30”, 36” or 48” ProfessionalRanges and Rangetops. CenterArrow