GE 495 Series Owner's Manual

Also see for 495 Series: Owner's manual

About mveming the door.Reversing the DoorToo/sneeded,[] Standard#2 [] Tape-tippedPhillipsscrewdriver puttyknife[] Needle-nosedpliersF_Open the door and remove the filler plugs opposite the hinges. With tim doorcompletely open, remove the bottom sc_ew fk'om each hinge on the (hyer f:ace. Insertthese screws about halfway into the lOP holes, for each hinge, on the opposite side(where you removed the filler plugs). Apply firm pressure to get the screw started inuntapped holes._-] Loosen top screw from each hinge on the duer face halfway. With one hand holdingthe top of the door and the other hand holding the bottom, remove the door fi'om theduet by lifting it UPand OUT[-_-]Rotate the door 180 °. Insert it on the opposite side of the opening by moving the doorIN and DOWN until the top hinge and the bottom hinge are resting on the top screwsinserted in step 1.[_ Remove the remaining screws fi'om the side of the opening fi'om which the door wasremoved. With these screws secure each hinge at the bottom. Tighten the two topscrews of each hinge. Reinsert the plastic plugs on the side fi'om which the door wasremoved.10