GE Amersham Imager 600 Operating Instructions Manual

Also see for Amersham Imager 600: User manual User manual

Contents

4.4.1 Network setupVirus protectionThe technical solution for Amersham Imager 600 protects it from virus transfer from in-fected USB flash drives. Each restart of the instrument resets the software to its originalinstallation.If you, for any reason, suspect that the instrument has been infected by a computervirus, restart the instrument as soon as possible.Note:Network connection optionsNOTICEDo not connect telephone lines to the Ethernet port.Only the IEC 60950-I/VL 60950-1 standard non-shielded cables areappropriate for connection to this connector.Connection to a network enables the instrument to access files from, and to save filesto, a network location.There are two options for network setup:1 DHCP2 Static IPIf a DHCP network is used the IP address will be assigned automatically by theDHCP server. If a Static IP network is used the network details have to be enteredmanually.Note:Amersham Imager 600 Operating Instructions 29-0645-17 AD 754 Installation4.4 Network4.4.1 Network setup