GE BAKER HUGHES Masoneilan SVi 1000 Quick Start Manual

© 2019 Baker Hughes, a GE company, LLC. All rights reserved. Masoneilan SVi1000 Positioner Quick Start Guide =| 13ModesThe SVi1000 provides the following modes of operation Normal mode HART® Override mode (ValVue Manual and Setup Modes) Failsafe mode Commission Process (Via Local User Interface) Find Stops via Local User Interface Manual upper stops adjustment via Local User Interface Autotune via Local User InterfaceThe SVi1000 always starts up in the mode that the unit was last in before power down, except forfailsafe mode when the condition causing fail safe has been corrected.WARNING Always ensure the SVi1000 has returned to Normal mode afterany configuration activity.Normal Mode In this mode the valve follows the 4-20 mA input signal.HART®OverridemodeIn HART® override mode, the local user interface buttons are disableduntil any button is pushed, then local control is reestablished.This, from the instrument interface, functions as Manual and Setupmode from the optional laptop-based software and other HART®interface tools.In HART® Override Mode the following tasks are supported overHART® by ValVue or DTM based interface: Set Characterization (Linear,Equal%(30,50,Camflex), QuickOpen and Custom Enable or Disable BumplessTransfer Set Near Closed Value Allow Tune to Override limits Configure Tight Shutoff Set Lower and Upper PositionLimits Configure Position FaultLimits (Position Error Band andTime 1) Configure Switch I/O Run Find Stops Run AutoTune (Provided theoption is set at the local userinterface)