GE BAKER HUGHES Masoneilan SVi 1000 Quick Start Manual

© 2019 Baker Hughes, a GE company, LLC. All rights reserved. Masoneilan SVi1000 Positioner Quick Start Guide =| 21Step 1: Mounting the SVi1000This guide provides installation instructions for mounting an SVi1000 on both rotary and recipro-cating style valves. The mounting process can be broken down into the following:1. Attach the mounting bracket to the actuator.2. Install the magnetic assembly.3. Assemble the SVi1000 on the mounting bracket.CAUTION The SVi1000 cover must be in place and secured using all fourscrews during operation.NOTE Mount the SVi1000 with the conduit connection down in order tofacilitate drainage of condensate from the conduit.Necessary PrecautionsTo avoid injury or the process being affected when installing or replacing an SVi1000 positioneron a control valve, ensure that: If the valve is located in a hazardous area, ensure the area has been certifiedas safe or that all electrical power to the area has been disconnected beforeremoving any covers or disconnecting any leads. Shut off air supply to the actuator and to any valve mounted equipment. Ensure the valve is isolated from the process by either shutting off theprocess or using bypass valves for isolation. Tag shutoff or bypass valves toguard against a turn-on while work is in progress. Bleed air from actuator and check that valve is in its unenergized position.For the procedure to install rotary and reciprocating mounting kits on valves, refer to the instruc-tions contained in the valve’s mounting box kit.