16Using the clock and timer. (on some models)To Set the ClockThe clock must be set for the automaticoven timing functions to work properly.The time of day cannot be changed duringa timed baking or self-cleaning cycle.Press theCLOCK pad twice.Press theHOUR andMIN. orSET TIME+/- pads.Press theCLOCK pad to start.Make sure the clock is set to thecorrect time of day.To Set the TimerPress theTIMER ON/OFF pad.Press theHOUR andMIN. orSET TIME+/- pads until the amount of time youwant shows in the display. The timerwill start automatically within a fewseconds of releasing the pad.Press theCLOCK pad if you wish toreturn to the clock display. The timerfunction will retain the programmedsettings.The timer is a minute timer only.The timer does not control ovenoperations. The maximum setting onthe timer is 11 hours and 59 minutesor 9 hours and 50 minutes, dependingon your model.End of Cycle Tones (on some models)Clear the tones by pressing the pad of thefunction you are using.To Reset the TimerIf the display is still showing the timeremaining, you may change it by pressingtheHOUR andMIN. orSET TIME +/- padsuntil the time you want appears in thedisplay.If the remaining time is not in the display,recall the remaining time by pressing theTIMER ON/OFF pad and then pressing theHOUR andMIN. orSET TIME +/- pads untilthe new time you want shows in the display.To Cancel the TimerPress theTIMER ON/OFF pad twice.