GE DCCB330EJWC Owner's Manual

Also see for Appliances DCCB330: Dimensions and installation information Owner's manual Owner's manual Owner's manual

Contents

GE DCCB330EJWC Owner's Manual Manual pdf 6 page image

6Consumer Support Operating Instructions Safety InstructionsCare and CleaningReversing the door.Tools needed: Standard #2 Tape-tippedPhillips screwdriver putty knifeOpen the door and remove the filler plugs opposite the hinges. With the doorcompletely open, remove the bottom screw from each hinge on the dryer face.Insert these screws about halfway into the TOP holes, for each hinge, on theopposite side (where you removed the filler plugs).Apply firm pressure to get the screw started in new holes.Loosen top screw from each hinge on the dryer face halfway. With one handholding the top of the door and the other hand holding the bottom, remove thedoor from the dryer by lifting it UP and OUT.Rotate the door 180°. Insert it on the opposite side of the opening by moving thedoor IN and DOWN until the top hinge and the bottom hinge are resting on thetop screws inserted in step 1.Remove the remaining screws from the side of the opening from whichthe door was removed. With these screws, secure each hinge at the bottom.Tighten the two top screws of each hinge. Reinsert the plastic plugs onthe side from which the door was removed.1234