7Safety Instructions Care and Cleaning Consumer SupportOperating InstructionsCountdown display. (DMCD models only) GEAppliances.comThe countdown display shows the remaining operating time as well as the current drying cycle.The display board is configured for a 45-minute dry time at the factory to correspond withthe 45-minute timer cam pre-installed in the coin box. If the timer cam is modified for anotheroperating duration, the dip switches on the display board should be set as follows:NOTE: This display does not accumulate time. See the following examples of display possibilities.DIP SWITCH NUMBERSDRYING TIME (minutes) 1 245 1 160 1 090 0 1120 0 0DIP SWITCH SETTING (min) COIN SLIDE ACTUATIONS DISPLAY READING (min)45 1 45 to 0, then blank45 2 45 to 1, then 1 for next 45 min.,then 0 and blank120 1 99 for 21 minutes, then 98 to 0,then blank