GE Digital Energy LP 33 Installation Manual

Also see for Digital Energy LP 33 Series: Operating manual Operating manual Operating manual Operating manual

Digital Energy™ gOPM_LPS_3UI_10K_20K_0US_V010.doc 17/38 Installation Guide LP 33 / 10 - 20 kVA3.6 UNPACKINGMove the equipment in it’s original packing, carton box or wooden case, until the place ofinstallation and remove the packing and the transport sockets only just before installing the UPS.1 Procedure for the unpacking of the UPS:• Make sure to have sufficient space around theUPS before you start unpacking.• Cut the two straps “A” fixing the carton box.2• Remove the wooden top cover “B”, which will beused as a ramp and position it as shown in thepicture.• Remove the protection “C” outside the cabinetand the accessories bag.• Remove the carton box “D”.3• Remove the 2 angle irons “E”, which are fixing theUPS to the wooden base “G” by unscrewing bolts“F”.4• Push now the UPS towards the ramp “B” and let itslide down the ramp.This has to done with the utmost care!Fig. 3.6-1 LP 33 unpacking sequenceNOTE !Be aware of the heavy weight of theUPS, in particular if already equippedwith Batteries.