GE Dishwasher Installation Instructions Manual

Also see for Dishwasher: Use and care guide Owner's manual Installation instructions Use and care guide

Contents

Figure AADishwasher InstallationSTEP 20: REPLACE ACCESS PANEL ANDTOEKICKIn this step you will need the panels and the twoscrews set aside in Step 4.There are two types of screws used. The 8-32 x 1/4"screws are used at the top of the access panel andshould still be in place. The 10-16 x 3/8" screws areused at the bottom of the access panel and secureboth the access panel and toekick.IMPORTANT – Screws are notinterchangeable. To prevent damage to yourdishwasher, use the proper screw in the properlocation. Do not mix screw types or lengths.• Place the toekick against the legs of thedishwasher.• Remove the two 8-32 x 1/4" machine threadscrews.• Align the access panel to the dishwasher.• Select the two 8-32 x 1/4" machine thread screwsjust removed and insert them through the topholes in the access panel and into the dishwasherframe.• Tighten these screws.• Align the toekick and make sure the bottom edgeis against the floor.• Insert and tighten the two 10-16 x 3/8" sheet metalthread screws, making sure the bottom edge ofthe toekick stays in contact with the floor.STEP 21: LITERATURE■ Leave the Owners’ Manual, InstallationInstructions, samples, and/or coupons withconsumer.15Tip: Prevent tub damage and reduce sound fromunder the dishwasherUse the machine thread screws in the top holes andthe sheet metal thread screws in the bottom holes.Make sure the toekick is against the floor.Access PanelToekickRemove, then Reinstall and Tighten8-32 x 1/4”Machine Thread ScrewsInstall and Tighten10-16 x 3/8”Sheet Metal Thread Screws

/ 16

Related manuals for GE Dishwasher