GE Dishwasher Installation Instructions Manual

Also see for Dishwasher: Use and care guide Owner's manual Installation instructions Use and care guide

Contents

Installation Preparation–Enclosure3Countertop: 1-1/2" Min. Thick10-1/4"Max. Area "A"Area "B"Area "C"Front View7-1/2"923-38CToekickAreaFloor24" 12"Min.6" Max.PREPARE DISHWASHER ENCLOSURE ANDSINK LOCATION• Water line to sink faucet and drain from sink canbe run through Area “A.”• Hot water line to dishwasher is installed in Area “B.”• Garbage disposer, water lines to faucet, wastetrap, air gap and water shut-off valve are installedin a 12" wide cabinet, Area “C”.Figure BFigure A• Sink opening for garbage disposer must bedimensioned as shown (7-1/2") in Area “C.” This willprovide clearance for disposer and plumbing inArea “C” when using either single or double bowlsink. Refer to Figure A below and Figure F1 onpage 6.PREPARE CABINET CUTOUT FOR SINK:#282 FrenchTo reduce the risk of shock, fire, or injury topersons, the installer must ensure that thedishwasher is completely enclosed at thetime of installation.WARNINGNote: A gap between the dishwasher tub front flange andthe front of the base cabinet may result due to eitherthe cabinet being less than 24" deep or the sink bowlnot being installed to specifications.If the gap is more than 3/4", the sink bowl must berelocated to meet specified dimensions.Cabinet SideAdjacent to D/WSinkInstallationCutout8" X 20"Adjacent CabinetRear Cutout12"3-1/4"12-1/2"24”min24” min5"5"DishwasherSide View11-3/4" Max.Plumbing4"Max.34-1/4"1/4"+_10-1/4" MAX.PLUMBINGDEPTH1" Max. ToSink Flange20-1/2" Max.Sink Bowl11" Min.Drain6" Max.3/4" Min.1-1/4"1-1/2"Close ElbowMin. I.R.24" Min.CabinetWall679DiaABADishwasherTubFrontFlange20-1/2" Max.Sink Bowl24" Min.CabinetWall679DiaKGap• The dishwasher must be fully enclosed on the top,sides and back.• The dishwasher must not support any part of theenclosure.• The cabinet opening must have a minimum widthand depth of 24" and height of 34-1/4" ± 1/4".• This dishwasher fits under a special sink with adepth of 6" or less in a 1-1/2" countertop.