GE FHV5SGWW Service Manual

Contents

Freezer Model:FHV5SGWW/FHV7SGWW２４MAINTENANCE SERVICE AND TROUBLE SHOOTINGMaintenance Service and Trouble Shootingkeep the temperature at 50-60℃, press the bar to make it recover,and press the bar around by hand, so that it can recover. If this isnot effective, take a piece of sponge with about 10mm wide, 5mmthick, a little longer than the seam and put it inside the seal bar,i.e., the place between the bottom of seal bar and the doorcushion. This will make the seam place higher and adhere tofreezer body the same as other places.12.1.9 Why freezer cannot be used at low temperatureenvironmentWhen environment temperature is below zero, the lubricationability of freezing oil in freezer compressor will decrease, thecompressor will be difficult to start or cannot be started, orCompressor damage may occur.12.1.10 How to know there is problem with compressormotorIt is easy to find out motor problem by checking the resistance ofcoil. The method is to connect the terminals of “common” and“run” using ohm- meter, the coil resistance can then bedetermined. Using terminals “common” and “start” can measurethe resistance of starting coil. If the value is infinite, the coil mustbe open. If the resistance is much less than the value the motorhas, there must be short circuit problem inside the motor or thewindings are burned.PDF created with pdfFactory trial version www.pdffactory.com