GE FUM13 Owners & Installation Manual

Also see for FCM15: Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Owners and installation manual Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions

Contents

Preparing to install the freezer. ge.comRead these instructions completely and carefully.Freezer LocationYour freezer should be conveniently located forday-to-day use in a dry, well-ventilated room.Do not install the freezer where the temperature willgo below 0°F or above 110°F, because it will notmaintain proper temperatures.Be sure to install your freezer on a floor strongenough to support it when it is fully loaded.The freezer must be solidly positioned on the floorif it is to function at its best. Shims may be used toaccomplish this wherever the floor is too uneven.If the place selected for the freezer is damp or moist,place 2 X 4’s (51 mm X 102 mm) under its entirelength to ensure adequate support.ClearancesOn all models, allow 3″ (76 mm) on top, back andsides for proper air circulation.Adjustable Legs (on Upright models)Legs at the front corners of the freezer shouldbe set so the freezer is firmly positioned onthe floor, and the front is raised just enoughso the door closes easily when opened abouthalfway.Turn rightto lowerTurn leftto raiseUnit Loading (on Upright models)CAUTION: To allow the door to close and sealproperly, DO NOT let food packages extendpast the front of the shelves.Level FreezerUpright Models:Discard crate screws and wood base. Usea carpenter’s level to level the freezer fromback to front. Adjust the plastic leveling feetin front 1/2 bubble higher so the door closeseasily when left open.Chest Models:If needed, add metal or wood shims betweenfoot pads and floor.Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions InstallationInstructions13