GE GSD1300N Installation Instructions Manual

Also see for GSD1300N: Owner's manual Datasheet

Contents

Installation Preparation–EnclosurePREPARE DISHWASHER ENCLOSUREFigure ATo reduce the risk of shock, fire, or injuryto persons, the installer must ensure thatthe dishwasher is completely enclosed atthe time of installation.#282 FrenchWARNING• The rough cabinet opening must have a minimumwidth and depth of 24" and height of 34-1/2" ± 1/4"from the floor to the underside of the countertop.• The back wall should be free of pipes or wires.• Adjacent cabinets should be square and plumb toensure a good fit. Refer to Figure A• For a corner installation, allow 2" minimumclearance between the dishwasher and theadjacent wall.• Provide at least 27" in front of the dishwasher toallow the dishwasher door to open fully. Refer toFigure B• Make sure the floor is level inside the opening andeven with the finished floor of the kitchen. This willfacilitate removal of the dishwasher at a later datefor service, if needed.�� 3Figure B• The dishwasher must be installed no more than10 feet from sink for proper drainage.• The dishwasher must be fully enclosed on the top,sides, and back.• The dishwasher must not support any part of theenclosure.2" MinimumCountertopDishwasher27" Minimum05A-1183FClearances:In a corner installation, provideat least 2" clearance betweenthe dishwasher and the adjacentcabinet, wall, or other appliance.Provide at least 27" of clearancein front of the dishwasher.