GE GSD4410 Owner's Manual

Also see for Appliances GSD4410: Owner's manual Owner's manual Owner's manual

Contents

Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service22ProblemPossible Causes What To DoControl panel lights go Time too long between • Each pad must be touchedoff when you’re setting touching of selected pads within 30 seconds of thecontrols others. To relight, touchany pad again, or unlockand relatch door.The word AUTO doesn’t The sensor is clogged • Try using the below stepsappear in the display or faulty to clear the sensor:1 Remove all metalutensils from thedishwasher.2 DO NOT ADD DETERGENT.3 SelectPOTS PANS cycleandENERGY SAVER DRYOFF.4 Start the dishwasher andallow to run until thetime remaining in thecycle appears in thedisplay.5 Then open the door andpour 1/4 cup of citricacid crystals into thebottom of thedishwasher. (Mostdrugstores carry citricacid crystals. If yoursdoesn’t, call GE Serviceand Parts Centers.)6 Close the door and allowthe dishwasher tocomplete the cycle.If the problem continuescall for service.Dishwasher won’t run Fuse is blown, or the • Replace fuse or resetcircuit breaker tripped circuit breaker. Removeany other appliances fromthe circuit.• Try resetting the displaypanel.Troubleshooting TipsReview the charts on the following pages first and you may notneed to call for service.Before you call for service…