GE Hotpoint NWXR483GGAWW Installation Instructions Manual

Installation[] RECONNECTING GASListed connector ANSI Z21.24 / CSA 6.10118" NPT PIPENEWMETAL PLUG FOR GASFLEXIBLEGAS INLET PRESSURELINECONNECTORADAPTERELBOW3/8" NPTSHUT-OFFPIPE SIZEITEMSNOT SUPPLIED AT LEAST 1/2"Note: The connector and fittings are designed for use ontyon the original insta[tation and are not to be reused foranother appliance or at another location. Keep flare end ofadaptor free of ]rease, oi[ and thread sealant.Caution: Use adapters as shown. Connector nuts must notbe connected directly to pipe threads.APPLYPIPECOMPOUNDTO THEADAPTERANDDRYERGAS INLET.TIGHTEN THE FLEXIBLEGAS LINE USING TWOADJUSTABLE WRENCHES.InstructionsAPPLYPiPECOMPOUNDTOALL MALETHREADS.TIGHTEN ALL CONNECTIONSUSING TWO ADJUSTABLE WRENCHES.DO NOT OVERTORQUE GAS CONNECTIONS!3LEAK TEST[,_ WARNING - NEVER USE AN OPENFLAME TO TEST FOR GAS LEAKS.OPENGASVALVE.Check alt connections for leaks with soapg solution or equivalent.Apply soap solution. Leak test solution must not contain ammo-nia which could cause damage to the brass fittings. If leaks arefound, close valve, retighten the joint, and repeat the soap test.