GE IP140 Series Installation Manual

GELighting Solutionsimagination at work(IP140 Series)Features• 0-10V & DALI control (optional)• Long life (50,000 hour rated life)• 5 year warranty• Dry location ratedGE LED LuminaireInstallation GuideBEFORE YOU BEGINRead these instructions completely and carefully.WARNING/AVERTISSEMENTRISK OF ELECTRIC SHOCK• Turn power off before inspection, installation or removal.• Properly ground electrical enclosure.RISK OF FIRE• Follow all NEC and local codes.• Use only UL approved wire for input/output connections.Minimum size 18 AWG.RISQUES DE DÉCHARGES ÉLECTRIQUES• Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.• Assurez-vous de correctement mettre à la terre le boîtier d’alimentation électrique.RISQUES D’INCENDIE• Respectez tous les codes NEC et codes locaux.• N’utilisez que des fils approuvés par UL pour les entrées/sorties deconnexion. Taille minimum 18 AWG.Save These InstructionsUse only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.Prepare Electrical WiringElectrical Requirements• The LED driver must be supplied with 100-277 VAC, 50/60 Hz and connected to an individual properlygrounded branch circuit, protected by a 15 or 20 ampere circuit breaker. Use min. 75°C supply conductor.Grounding Instructions• The grounding and bonding of the overall system shall be done in accordance with National Electric Code(NEC) Article 600 and local codes.Tools and components required:• #2 Phillips head screwdriver.• UL Recognized conduit connections per NEC/CEC for nominal conduit trade sizes ½” or ¾”.• UL Recognized wire connectors.

/ 4

Related manuals for GE IP140 Series