Safety Instructions Operating InstructionsSafety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer SupportUsing the surface units.ge.comThroughout this manual, features and appearance may vary from your model.How to SetPush the knob in and turn in either directionto the setting you want.At bothOFF andHI the controlclicks intoposition. You may hear slightclicking soundsduring cooking, indicating the control iskeeping the power level you set.AHOT COOKTOP indicator light will glowwhen any radiant element is turned on, andwill remain on until the surface is cooled toapproximately 150°F.Indicator light will:come on when the unit is turned on or hot to thetouch.stay on even after the unit is turned off.glow until the unit is cooled to approximately 150°F.Be sure you turn the control knob to OFFwhen you finish cooking.7Tri-Ring Surface Element (on some models)The rear center surface element offers 3 cooking areasto match the size of the cookware youare using.To use the largest cooking area, push in andturn theSELECTOR knob to 12″. Push andturn the control knob to the desired setting.To use the medium cooking area, press andturn theSELECTOR knob to 9″.Push down and turn the control knob to thedesired setting.To use the smallest cooking area, turn theSELECTOR knob to 6″. Push and turn thecontrol knob to the desired setting. This willactivate only the smallest inside heating area.OFFBURNERSIZE6"9"12"Dual Surface Unit (on some models)The dual surface unit has 2 cooking sizes to selectfrom so you can match the size of the unit to thesize of the cookware you are using.To use the small surface unit, push intheSMALL BURNER portion of the switchabove the control knob.To use the large surface unit, push intheLARGE BURNER portion of the switchabove the control knob.Dual Surface Unit Control Knob (on some models)The dual surface unit has 2 cooking sizes to select fromso you can match the size of the unit to the size of thecookware you are using.To use the small surface unit, turn the controlknob to theSMALL BURNER settings.To use the large surface unit, turn the controlknob to theLARGE BURNER settings.