GE JB960 B Technical Service Manual

Also see for JB940: Installation instructions Installation instructions Owner's manual Owner's manual Owner's manual

GE JB960 B Technical Service Manual Manual pdf 17 page image

– 15 –ABCHIDDEN BAKE ELEMENTThe bake element is located underneath theoven liner (hidden bake), where it is protectedfrom spillage and oven cleaning agents whichcan shorten the life of the element.The bake element is accessible from the left side(facing the unit) of the range. To access the bakeelement, carefully remove the range from its in-stallation taking care to protect the customer’sfloor.Bake Element Removal:1. Remove power to the unit.2. Remove the cooktop following the instruc-tions outlined on page 14.3. Remove the seven screws shown in theillustration to the right.4. At the front corner of the panel, near theleveling leg, is a hidden screw. Access tothis screw is obtained by removing the stor-age drawer. From inside the storagedrawer area, located just above the leftfront leveling leg (as you face the unit), aretwo 1 inch holes. If you shine a light intothe top hole you will be able to see the ¼inch hex screw that will need to be re-moved, in order to remove the side panel.5. Facing side of the panel, grasp the frontand rear portion of the panel. Pull the rearof the panel towards you (A) approximately2-3 inches, while lifting upwards on the frontof the panel (B) approximately 1 inch. No-tice in the illustration to the right that thepanel is held to the range frame with 2 ny-lon grommets (top and center of panel),which fit into holes in the side panel. Bylifting upwards on the front panel (B), whileat the same time pulling the panel towardsyou (C), you are able to disengage thepanel from the rubber grommets.HIDDEN BAKEPHILLIPS#10 TORX¼ HEX¼ HEX¼ HEX¼ HEX¼ HEX