Careand cleaning of the range.Be sure all controls are off and all surfaces are cool before cleaning any part of the range.If your range is removed for cleaning, servicing or any reason, be sure the anti-tipdevice is reengaged properly when the range is replaced. Failure to take thisprecaution could result in tipping of the range and cause injury.How to RemovePackaging Tape'lb assure no damage is done to the finishof the product, the safest way to removetim adhesive left from packaging tape onnew appliances is an application of ahousehold liquid dishwashing detergent,mineral oil or cooking oil.Apply with a .soft cloth and Nlow to soak.Wipe dry and then apply" an appliancepolish to thoroughly clean and protecttim surface.NOTE:Theplastictapemustbe removedfromallchrometrim.It cannotbe removedif it isbakedon.GrooveStemControl KnobsThecontrolknobsmaybe removedfor easiercleaning.Befbre removing the knobs forcleaning, please note that the knobs arein the OFFposition. When replacing theknobs, check the OFF position to ensureproper placement.Wash the knobs in soap and water ora vinegar and hot water solution butdo not soak.The knob stem has a groove in eachside. The groove on one side has aspring clip. The other groove is clear(see illustration). Check the inside ofthe knob and find the molded rib.Replace the knob by"fitting the moldedrib inside the knob into the cleargroove on the stem.FlatStem The knob stem is flat on one side (see Replace the knob by"fitting the moldedillustration). Check the inside of the flat area inside the knob onto the flatknob and find the molded flat area. area of the stem.Oven VentTheovenventis locatedbehindtherightrearsurfaceunit.This area could become hot duringovell use.It is normal for steam to come out of thevent and moisture may collectunderneath it when the oven is in use.Theventis importantforproperair circulation.Neverblockthis venL22