13To Set the ClockTo Set the TimerThe clock must be set to the correct timeof day for the automatic oven timingfunctions to work properly. The time ofday cannot be changed during a timedbaking or self-cleaning cycle.The timer does not control oven operations.The maximum setting on the timer is 9 hoursand 59 minutes.1122334Touch the START/ON pad until thetime of day shows in the display. Thisenters the time and starts the clock.Touch the START/ON pad. The timewill start counting down, althoughthe display does not change untilone minute has passed.When the timer reaches :00, thecontrol will beep 3 times followedby one beep every 6 seconds untilthe TIMER pad is touched.Using the clock, timer and convenience outlet. (on some models)Not all features are on all models.To check the time of day when the displayis showing other information, simply touchthe TIMER pad. The time of day showsuntil another pad is touched.Touch TIMER pad and hold for 3secondsTouch the + or – pads.Touch the TIMER pad.Touch the + or – pads until theamount of time you want showsin the display. The maximum timethat can be entered in minutes is 59.Times more than 59 minutes shouldbe changed to hours and minutes.If the + or – pads are not touched withinone minute after you touch the TIMER pad,the display reverts to the original setting.If this happens, touch the TIMER pad andreenter the time of day.If you make a mistake, touch the TIMERpad and begin again.Make sure the clock is set to thecorrect time of day.The timer is a minute timer only.The OFF pad does not affect thetimer.Consumer SupportTroubleshooting TipsCare and CleaningSafety Instructions InstallationInstructionsOperatingInstructions