GE JCSP42 Owner's Manual

Also see for JCSP42: Owner's manual Owner's manual

Using the oven controls.Throughout this manual, features and appearance may vary from your model.Oven Control, Clock and Timer Features and SettingsBAKE PadPress this pad to select the bake function.DisplayShows the time of day, oven temperature,whether the oven is in the bake, broil orself-cleaning mode and the times set forthe timer or automatic oven operations.If “F– “ and a number or letter flash in the display and theoven control signals, this indicates a function error code.If your oven was set for a timed oven operation anda power outage occurred, the clock and all programmedfunctions must be reset.The time of day will flash in the display when there hasbeen a power outage.COOKING TIME PadPress this pad and then press the numberpads to set the amount of time you wantyour food to cook. The oven will shut offwhen the cooking time has run out.DELAY START PadUse along with COOKING TIME or SELFCLEAN pads to set the oven to start andstop automatically at a time you set.CLOCK PadPress this pad before setting the clock.KITCHEN TIMER ON/OFF PadPress this pad to select the timer feature.CLEAR/OFF PadPress this pad to cancel ALL ovenoperations except the clock and timer.Number PadsUse to set any function requiring numberssuch as the time of day on the clock, thetimer, the oven temperature, the start timeand length of operation for timed bakingand self-cleaning.START PadMust be pressed to start any cooking orcleaning function.SELF CLEAN LO/STD PadPress this pad to select the self-cleaningfunction. See the Using the self-cleaningoven section.OVEN LIGHT PadPress this pad to turn the oven light onor off.BROIL HI/LO PadPress this pad to select the broil function.10Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions