GE Profile JD968 Installation Instructions Manual

Also see for JD900: Owner's manual Installation instructions Owner's manual Owner's manual Owner's manual

Contents

1Before You BeginRead these instructions carefully and completely.• IMPORTANT —Save theseinstructions for local inspector’s use.• IMPORTANT —Observe allgoverning codes and ordinances.• Note to Installer—Be sure to leave theseinstructions with the consumer.• Note to Consumer—Keep theseinstructions for future reference.• Proper installation is the responsibilityof the installer and product failure dueto improper installation is NOT coveredunder the warranty.• NOTE—This appliance must be properlygrounded.• ATTENTION INSTALLERAll electric drop-in ranges must be hardwired (direct wired) into an approvedjunction box. A plug and receptacle is NOTpermitted on these products.If you have questions, call 1.800.GE.CARES or visit our website at:ge.comSelf-Cleaning RadiantElectric Drop-In RangeInstallationInstructions JDP47, JD968, JD900Materials NeededJunction Box Wire NutsStrain Relief Clampfor 1/2” conduitParts IncludedLower Trim2 Screws2 Shoulder Screws(for stop device)Tools You Will Need1/8” Drill Bit andElectric or Hand DrillPhillips ScrewdriverNut DriverLevelTape MeasureStraight Edgeor SquareHand or Sabre SawStandard ScrewdriverPencilSafety GlassesHammer31-10622-1 1-07 JR