GE JGB928 Owner's Manual & Installation Instructions

Also see for JGB928: Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions

GE JGB928 Owner's Manual & Installation Instructions Manual pdf 33 page image

Normal Daily Use CleaningONLY use CERAMA BRYTE® CeramicCooktop Cleaner on the glass cooktop.Other creams may not be as effective.To maintain and protect the surface ofyour glass cooktop, follow these steps:Before using the cooktop for thefirst time, clean it with CERAMABRYTE® Ceramic Cooktop Cleaner.This helps protect the top and makesclean-up easier.Daily use of CERAMA BRYTE®Ceramic Cooktop Cleaner will helpkeep the cooktop looking new.Remove the burner grates.Shake the cleaning cream well. Applya few drops of CERAMA BRYTE®Ceramic Cooktop Cleaner directly tothe cooktop.Use a paper towel or CERAMABRYTE® Cleaning Pad for CeramicCooktops to clean the entire cooktopsurface.Use a dry cloth or paper towelto remove all cleaning residue.No need to rinse. Be sure no excessresidue is left on the electrodes orburner parts.NOTE: It is very important that you DO NOT heatthe cooktop until it has been cleaned thoroughly.Burned-On ResidueWARNING: DAMAGE to your glass surface mayoccur if you use scrub pads other than thoserecommended.Allow the cooktop to cool.Remove the burner grates. Spreada few drops of CERAMA BRYTE®Ceramic Cooktop Cleaner to theentire burned residue area.Using the included CERAMA BRYTE®Cleaning Pad for Ceramic Cooktops,rub the residue area, applyingpressure as needed.If any residue remains, repeat thesteps listed above as needed.For additional protection, after allresidue has been removed, polish theentire surface with CERAMA BRYTE®Ceramic Cooktop Cleaner and apaper towel.The CERAMA BRYTE ® CeramicCooktop Scraper and allrecommended supplies areavailable through our Parts Center.See instructions under “To OrderParts” section on next page.NOTE: Do not use a dull ornicked blade.Clean your cooktop aftereach spill. Use CERAMABRYTE® Ceramic CooktopCleaner.Heavy, Burned-On ResidueAllow the cooktop to cool.Remove the burner grates.Use a single-edge razor blade scraperat approximately a 45° angle againstthe glass surface and scrape the soil.It will be necessary to apply pressureto the razor scraper in order toremove the residue.After scraping with the razor scraper,spread a few drops of CERAMABRYTE® Ceramic Cooktop Cleaner tothe entire burned residue area. Usethe CERAMA BRYTE® Cleaning Padto remove any remaining residue.For additional protection, after allresidue has been removed, polish theentire surface with CERAMA BRYTE®Ceramic Cooktop Cleaner and apaper towel.Use a CERAMA BRYTE ® CleaningPad for Ceramic Cooktops or aScotch-Brite® Multi-Purpose NoScratch blue scrub pad.Cleaning the glass cooktop. (on some models) ge.comConsumer SupportInstallation Instructions Troubleshooting TipsOperating InstructionsSafety Instructions33