GE JGBP75 Use And Care & Installation Manual

Also see for JGBP75: Use and care & installation guide

GE JGBP75 Use And Care & Installation Manual Manual pdf 24 page image

OPERATING THE SELF-CLEANING OVENNormal Cleaning Time: 3 hoursBefore a Clean CycleWe recommend venting with an open windowor using a ventilation fan or hood during the firstself-clean cycle.1. Remove the broiler pan, broiler grid, all cookwareand any aluminum foil from the oven—they cannotwithstand the high cleaning temperatures.NOTE: Take the shelves out of the oven beforeyou begin the self-clean cycle.2. Wipe up heavy soil on the oven bottom. If youuse soap, rinse thoroughly before self-cleaningto prevent staining.3. Clean spatters or spills on the oven front frame, andthe oven door outside the gasket with a dampenedcloth. The oven front frame and the oven door outsidethe gasket do not get cleaned by the self-clean cycle.On these areas use detergent and hot water or a soap-filled steel wool pad. Rinse well with a vinegar andwater solution. This will help prevent a brown residuefrom forming when the oven is heated. Buff theseareas with a dry cloth. Do not clean the gasket.Clean the top, sides and outside front of the ovendoor with soap and water. Do not use abrasives oroven cleaners.Make sure the oven light bulb cover is in place.Do not rub or clean the door gasket—the fiberglass material of the gasket has anextremely low resistance to abrasion. An intactand well-fitting oven door gasket is essential forenergy-efficient oven operation and good bakingresults. If you notice the gasket becoming worn,frayed or damaged in any way or if it has becomedisplaced on the door, you should have it replaced.4. Close the door and make sure the oven light is off. Ifthe oven light is not turned off, the life of the bulbwill be shortened or it may burn out immediately.CAUTION: The grates and drip pans(on some models) should never be cleaned inthe self-cleaning oven.Do not use commercial oven cleaners or ovenprotectors in or near the self-cleaning oven.A combination of any of these products plus thehigh clean cycle temperatures may damage theporcelain finish of the oven.Quick Reminder:1. Prepare the oven for cleaning.2. Close and latch the oven door.3. Press the AUTO CLEAN or AUTO SELFCLEAN pad.4. Press the + or – pad.If you wish to change the preset Clean Time of3 hours, press the + or – pad until the desiredStop Time appears in the display.OvenfrontframeOven doorgasketOvenlightAreainsidegasketAreaoutsidegasket24