GE JGBP75 Use And Care & Installation Manual

Also see for JGBP75: Use and care & installation guide

GE JGBP75 Use And Care & Installation Manual Manual pdf 44 page image

44QUESTIONS?BEFORE YOU CALL FOR SERVICE…PROBLEM POSSIBLE CAUSETOP BURNERS DO NOT • Make sure electrical plug is plugged into a live power outlet.LIGHT OR DO NOT • Burner holes on the side or around the top of burner may be clogged. RemoveBURN EVENLY burners (on models with standard twin burners) or burner heads (on models withsealed burners) or burner caps on spill-proof models, and clean them with asewing needle or twist-tie. Make sure you do not enlarge the holes. Onspill-proof models, check electrode area for burned-on food or grease.• Make sure the drip pans are installed correctly.• Pilot(s) is (are) not lit (on standing pilot models). See the Lighting Instructionsfor Standing Pilot Models in Surface Cooking.BURNER FLAMES VERY • If range is connected to LP gas, contact the person who installed your rangeLARGE OR YELLOW or made the conversion.SURFACE BURNERS • The oven gas shut-off valve may have accidentally been moved duringLIGHT BUT OVEN cleaning or moving.DOES NOT To check the oven gas shut-off valve on standard twin burner models, raisethe cooktop and look for the gas shut-off lever at the extreme right rear corner.(Standing pilot models do not have a gas shut-off valve on the regulator.)Follow the directions in box A or B that match your regulator type.To check the oven gas shut-off valve on sealed burner models, remove thestorage drawer, broiler drawer or kick panel and look for the gas shut-off leverat the back of the range.Follow the directions in box A or B that match your regulator type.Lever shown closed.PULL TO OPEN.Lever shown closed.PULL TO OPEN.Lever shown closed.PULL TO OPEN.A BA BStandard Twin Burner ModelsSealed Burner ModelsLevershown closed.PULL TOOPEN.Sealed Burner ModelsStandard Twin Burner Models