GE JGP328 Owner's Manual

Also see for JGP970: Installation instructions Owner's manual Owner's manual Installation instructions Installation instructions

Contents

GE JGP328 Owner's Manual Manual pdf 12 page image

12Cleaning the glass cooktop surface. (on some models)Allow the cooktop to cool.Remove the burner grates. Use asingle-edge razor blade scraper atapproximately a 45° angle againstthe glass surface and scrape thesoil. It will be necessary to applypressure to the razor scraper inorder to remove the residue.After scraping with the razorscraper, spread a few drops ofCERAMA BRYTE® CeramicCooktop Cleaner on the entireburned residue area. Use theCERAMA BRYTE® Cleaning Pad toremove any remaining residue.For additional protection,after all residue has beenremoved, polish the entiresurface with CERAMA BRYTE®Ceramic Cooktop Cleanerand a paper towel.Burned-On ResidueWARNING: DAMAGE toyour glass surface may occur if you use scrubpads other than those recommended.Allow the cooktop to cool.Remove the burner grates andspread a few drops of CERAMABRYTE® Ceramic Cooktop Cleaneron the entire burned residue area.Using the included CERAMABRYTE® Cleaning Pad for CeramicCooktops, rub the residue area,applying pressure as needed.If any residue remains, repeat thesteps listed above as needed.For additional protection, after allresidue has been removed, polishthe entire surface with CERAMABRYTE® Ceramic Cooktop Cleanerand a paper towel.Heavy, Burned-On ResidueNormal Daily Use CleaningONLY use CERAMA BRYTE® CeramicCooktop Cleaner on the glass cooktop.Other creams may not be as effective.To maintain and protect the surface ofyour glass cooktop, follow these steps:Before using the cooktop forthe first time, remove the burnergrates and clean the cooktopwith CERAMA BRYTE® CeramicCooktop Cleaner. This helpsprotect the top and makescleanup easier.Daily use of CERAMA BRYTE®Ceramic Cooktop Cleaner will helpkeep the cooktop looking new.Shake the cleaning cream well.Apply a few drops of CERAMABRYTE® Ceramic Cooktop Cleanerdirectly to the cooktop.Use a paper towel or CERAMABRYTE® Cleaning Pad for CeramicCooktops to clean the entirecooktop surface.Use a dry cloth or paper towelto remove all cleaning residue.No need to rinse.NOTE: It is very important that you DO NOTheat the cooktop until it has been cleanedthoroughly.Clean your cooktop aftereach spill. Use CERAMABRYTE ® Ceramic CooktopCleaner.Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety InstructionsUse a CERAMA BRYTE ® CleaningPad for Ceramic Cooktops.The CERAMA BRYTE ® CeramicCooktop Scraper and allrecommended supplies areavailable through our Parts Center.See instructions under “To OrderParts” section on next page.NOTE: Do not use a dull ornicked blade.