GE JGP329 Owner's Manual

Also see for JGP970: Installation instructions Owner's manual Owner's manual Owner's manual Installation instructions

Contents

GE JGP329 Owner's Manual Manual pdf 9 page image

GEAppliances.comBurner cap properly seated€Burner cap not properly seatedBurner Head and Cap ReplacementReplace the burner head onto the burner base,making sure that the head is properly orientedover the burner base and the electrode. Makesure to place the correct burner head on thecorrect burner base and that the burner headsits level on the burner base. The burner headsare not interchangeable.Replacethe burner cap onto the burner head,making sure to place the correct burner cap onthe correct burner head. Theburner caps arenot interchangeable.Also, make sure that theburner caps are properly seated on the burnerheads.JGP940 and JGP970 Kollburners)Burner copBurner headindentations baseMake sure the pins in the burner heads matchthe burner base indentations and that they areproperly seated in them by rotating the headsuntil they are levelJGP329, JGP333, PGP943 andPGP966L _Burner baseMake sure the slot in the burner head is positionedover the electrode. The burner cap has threeto four pins. When replacing the cap, make surenone of the pins sits in the stability chamber.JGP333, PGP943 and PGP966flight front burner onlg)Burner capBurner head,/_assembly _ OrificeElectrode baseMake sure the hole in the burner head assemblyis positioned over the electrode and that the burnerhead is fully inserted inside the burner base.A smallgap between the base and head is normal(On some models)"OUTSIDE.... INSIDE.... OUTSIDE"edge edges edge(On some models)"INSIDE"edgesI"OUTSIDE"edgeTabsBurner GratesYour cooktop has professional style grates.These grates are designed for specificpositions. These grates should only be usedin their proper positions; they should not beinterchanged. For your convenience, theundersides ofthe left and right grates are marked "OUTSIDE"and "INSIDE".Make sure that the sides marked"OUTSIDE"are facing the outer edge of thecooktop and the sides marked "INSIDE"arefacing each other. All grates shouldtouch once they arefully assembled on thecooktop surface."OUTSIDE"edgeFor cooktops with three grates, makesure that the tabs on either side ofthe center grate fit into the slotslocated on the "INSIDE"edge of theside grates.Lift the burner grates out only when cool.Grates should be washed regularly and, ofcourse, after spillovers. Wash them in thedishwasher or in hot, soapy water and rinsewith clean water. When replacing the grates,be sure they are positioned securely over theburners.Although they are durable, the grates willgradually lose their shine, regardless of thebest care you can give them. This is due to theircontinual exposure to high temperatures. Youwill notice this sooner with lighter color grates.Do not operate a burner for an extended periodof time without cookware on the grate. Thefinish on the grate may chip without cookwareto absorb the heat.NOTE:Do not clean the grates in a self-cleaningoven.