GE JGP963 - Profile 36" Deep Recessed Gas Cooktop Installation Instructions Manual

Also see for JGP628: Installation instructions Owner's manual Installation instructions Owner's manual Owner's manual

Contents

11Installation InstructionsCHECK IGNITERSOperation of the electric igniters should bechecked after the cooktop and supply linehave been carefully checked for leaks and thecooktop has been connected to the electricalpower.Push and turn a burner valve to the LITEposition.• The burner valve should light when gasis available to the burner.• Once the burner lights, it should beturned out of the LITE position.Try each valve separately until allburners have been checked.BA2BURNER IGNITIONCooktop Spark Ignition—When you turnthe cooktop knob to LITE, the spark ignitermakes a series of electric sparks (tickingsounds) which light the burner. During apower failure, the burners will not lightautomatically. In an emergency, a cooktopburner may be lit with a match by followingthe steps below.WARNING: Lighting gas burnerswith a match is dangerous. You shouldmatch light the cooktop burners only inan emergency.Light a match and hold the flame nearthe burner you want to light. Woodenmatches work best.Push in and turn the control knob slowly.Be sure you are turning the correct knobfor the burner you are lighting.NOTE: If the burner does not light within fiveseconds, turn the knob off and wait one minutebefore trying again.BA3THE BURNER FLAMESTurn each burner on. Flames should be bluein color with no trace of yellow. The burnerflames should not flutter or blow away fromthe burner. The inner cone of the flameshould be between 1/2″ and 3/4″ long.WARNING: If you attempt tomeasure the inner cone of the flame, pleaseuse caution. Burns could result.4Burners should be checked frequentlyCooktop Burner1/2″to3/4″