GE JGSP20GER Use And Care Manual

Also see for JGSP20GER: Technician manual

OVEN CONTROL, CLOCK AND TIMERClock To Set the ClockThe clock must be set for theautomatic oven timing functions towork properly. The time of daycannot be changed during a TIMEBAKE or CLEAN cycle. c1Step 1: Press theCLOCK pad.CLOCK1 Step 2: PressA INCREASE orDECREASE pad to~ set the time of day.Step 3: Press the CLOCK padto start.Timer To Set the TimerThe timer is an alarm or minutetimer only. The timer does notcontrol oven operations. Themaximum setting on the timer is9 hours and 55 minutes. 1 Step 1: Press theTIMER pad.TIMERStep 2: Press INCREASE orDECREASE pad to set the amountof time on timer.The timer will start automaticallywithin a few seconds of releasingthe pad.The timer, as you are setting it,will display seconds until 1 minuteis reached.Then it will display minutesand seconds until 10 minutesis reached.After 10 minutes, it will displayhours (“HR” now appears indisplay) and minutes until themaximum time of 9 hours and55 minutes is reached.To Reset Timer To Cancel Timer Power Outage?Press TIMER pad and then press Press TIMER pad until the word After a power outage, when powerINCREASE or DECREASE pad “TIMER” quits flashing on the is restored, the display will flashuntil the time you want shows on display (about 4 seconds). and time shown will no longer bethe display. correct-for example, after a5-minute power interruption theclock will be 5 minutes slow.The display flashes until the clockis reset. All other functions thatwere in operation when the powerwent out will have to beprogrammed again.Timer Tones Display MessagesThe timer tone is three short beeps followed by If “door” appears on the display, the door is not1 beep that repeats every six seconds until you press closed. lf “LOCK” appears on the display, the ovenany operation. If you would like to eliminate the door is in the locked position. BAKE, BROIL andrepeating beeps, press and hold the CLEAR/OFF pad COOK TIME cannot be set if the door is in thefor 10 seconds. locked position.To return the timer tone to the repeating beeps, pressand hold the CLEAIUOFF pad for 10 seconds.14