Electric IgnitionYour surface burners are lighted by electric ignition, Surface burners in use when an electrical powereliminating the need for standing pilot lights with failure occurs will continue to operate normally.constantly burning flames.In case of a power failure, you can light the surfaceburners on your range with a match. Hold a lightedmatch to the burner, then turn the knob to the LITEposition. Use extreme caution when lightingburners this way.Surface Burner Controls Super BurnerKnobs that turn the surface burners on and off are On some models, the right front burner is cone-shapedmarked as to which burners they control. The two with a circular opening through the center of theknobs on the left control the left front and left rear burner. This burner can provide 3090 more powerburners. The two knobs on the right, nearest to the than any one of the other three. Use it for canning orcontrol panel, control the right front and right large pans.rear burners.To Light a Surface BurnerPush the control knobin and turn itAfter the burnerignites, turn thecounterclockwise to knob to adjust theLITE. You will hear a flame size.little clickingnoise—the sound ofthe electric sparkigniting the burner.After Lighting a BurnerCheck to be sure the burner you Do not operate a burner for an Be sure the burners and grates areturned on is the one you want extended period of time without cool before you place your hand, ato use. cookware on the grate. The finish pot holder, cleaning cloths or otheron the grate may chip without materials on them.cookware to absorb the heat. (cor7fi/7ud m.rtpage)9