GE JKP35BM Dimensions And Installation Information

Also see for JKP35: Installation instructions Installation instructions Owner's manual Brochure Installation instructions

Contents

installation instructions

Dimensions and Installation Information (in inches)For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.JKP35BM/WMGE® 27" Built-In Double Wall OvenKW Rating240V 6.8208V 5.1Breaker Size240V 30 Amps208V 30 AmpsListed byUnderwritersLaboratoriesAll GE ranges are equipped withan Anti-Tip device. The installationof this device is an important,required step in the installationof the range.Specification Created 1/07 320372Note: Cabinets installed adjacent to wall ovensmust have an adhesion spec of at least a 194°Ftemperature rating. For 27” built-in singleovens, if marks, blemishes or the cutout openingis visible above the installed oven, it may benecessary to add wood shims under the runnersand front trim until the marks or openingsare covered.Note: Door handle protrudes 3" from door face.Cabinets and drawers on adjacent 45° and 90°walls should be placed to avoid interference withthe handle.Electric wall ovens are not approved forinstallation with a plug and receptacle.They must be hard wired in accordance withinstallation instructions.Installation Information: Before installing, consultinstallation instructions packed with product forcurrent dimensional data.CabinetA – Cabinet wB – MinimumC – OpeningD – OpeningE – RecommOvenF – Overall dG – Overall hOverall hH – Overall w*Depth includiSuitabbracinto supporunne10Locatej unction boxfor 27"modelseither 5" MIN.below cutoutfloor or 44"MIN. abovecutout floorAccessfromadjacentcabinetrequiredAllow 3/4"for overlapover all edgesof cutoutAMinimumcutout locationfrom floorDE2" X 4" orequiv. runners(cutout floor) 21" MIN.door openingallowanceBCHFGLocatejunction boxfor 24"models56" MIN. abovecutout floorConduit(48-1/2" Long)21Cabinet 27"A – Cabinet width required 27" min.B – Minimum cabinet depth 23-5/8"C – Opening width 25" min. - 25-1/4" maxD – Opening height 50-1/8" maxE – Recommended minimum cutout location from floor 13-1/4"OvenF – Overall depth* 23-5/8"G – Overall height with trim 51-7/8" - 52-3/4"Overall height without trim 51"H – Overall width 26-5/8"*Depth including door handle is approximately 26-7/10" min. to 26-8/10" max.CLSuitablebracingto supportrunners 18"Over centerlineof cabinet(must support 300 lbs.)2" x 4" orequivalentrunners10Allow 3/4"for overlapover all edgesof cutoutAX 4" oruiv. runnerstout floor) 21" MIN.door openingallowanceBCHFGLocatejunction boxfor 24"models56" MIN. abovecutout floorConduit(48-1/2" Long)21

/ 2

Related manuals for GE JKP35