Dimensions and Installation Information (in inches)For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.320436Specification Revised 10/07JKP70BM/WMGE® 27" Built-In Single Convection Wall OvenListed byUnderwritersLaboratoriesUndercounter Installation Dimensions Sealed Burner Gas CooktopInstallation DimensionsStandard Burner Gas CooktopInstallation Dimensions25Gas or electric cooktops may be installed over thisoven. See cooktop installation instructions for cutout size.See label on top of oven for approved cooktop models.Gas or electric connectionsfor gas cooktop must belocated in an adjacentaccessible location to the right5240V / 208VJunction BoxLocation36"TypicalCountertopHeight24Allow 1"unit overlapall edges25" MIN.25 1/4" MAX.27 5/8" MIN.28 1/8" MAX.3/4" SupportPlatform RequiredMust Support 150 Lbs.22" MIN.AboveSupportPlatformNote: Oven is rated for use only under 30" standard or sealed burner gasand selected 30" CleanDesign and Calrod ® electric cooktops.Installation Information: Before installing, consult installation instructionspacked with product for current dimensional data.90° Street el45° ElbowCabinet sides2" Diameter hole (20-7/8"from front of countertopto hole center)Sealed Burner Gas Cooktop Installation(Pub. 1-G003 pg. 107) May 11, 19935" To center of 2" diameterhole from countertop90° Street el45° ElbowTo center of 2" diameterhole from countertopCabinet sides3-7/16"2" MIN. diameter hole(23-1/4" from frontsurface of countertop)Standard Burner Gas Cooktop Installation(Pub. 1-G003 pg. 107) May 11, 1993Note: Cabinets installed adjacent to wall ovensmust have an adhesion spec of at least a 194°Ftemperature rating.Electric wall ovens are not approved for installation with a plugand receptacle. They must be hard wired in accordance withinstallation instructions.