GE JKP86SH Dimension Manual

GE JKP86SH Dimension Manual Manual pdf 1 page image

GE AppliancesSpecification Revised 5/04320358JKP86SH – GE 27" Built-In Double Microwave/Thermal OvenDimensions (in inches)(Must support 275 lbs.)6015 Built-In MW/Double Ovens(Pub. 1-G003 pg 105B) May 12, 1993Built-In Microwave/Double OvensDimensions (in inches)EMinimumcutout locationfrom floorAllow minimum of21" for clearanceto adjacent corners,drawers, walls, etc.212" X 4" orequiv. runnersConduit(49" long)Allow 3/4" for overlapof oven over alledges of cutout10ADRecommendedjunction boxlocations.Locate junctionbox either 5" MIN.below cutoutfloor or 48" MIN.above cutoutfloorCBFGHCLSuitablebracingto supportrunners 18"Over centerlineof cabinet2" x 4" orequivalentrunnersNote: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°Ftemperature rating.Note: If marks, blemishes or the cutout opening is visible above the installed oven, it may benecessary to add wood shims under the runners and front trim until the marks or openingsare covered.KW Rating240V 6.4208V 5.1Breaker Size240V 30 Amps208V 30 AmpsCabinet 27"A – Cabinet Width Required 27" min.B – Minimum Cabinet Depth 23-5/8"C – Opening Width 25" min.-25"-1/4 max.D – Opening Height 41-1/4" max.E – Minimum Cutout Location from Floor 22"OvenF – Overall Depth 23-5/8"w/o trim 41-1/8"G – Overall Height with trim 42-1/8"H – Overall Width 26-5/8"Note: Cabinets installed adjacent to wall ovens must have an adhesion specof at least a 194°F temperature rating.Installation Information: Before installing, consult installation instructionspacked with product for current dimensional data.RListed byUnderwritersLaboratoriesFor answers to your Monogram,® GE Profile™ orGE ® appliance questions, visit our website atGEAppliances.com or call GE Answer Center ®service, 800.626.2000.Electric wall ovens are not approved for installation with a plug and receptacle.They must be hard wired in accordance with installation instructions.

/ 2

Related manuals for GE JKP86SH