GE JKP9027 Owner's Manual

Also see for JKP90: Installation instructions Brochure Technical service guide Installation instructions Dimensions and installation information

GE JKP9027 Owner's Manual Manual pdf 30 page image

30Safety InstructionsOperating InstructionsCare and CleaningTroubleshooting TipsConsumer SupportUsing the self-cleaning lower oven.The oven door must be closed and all controls must be set correctly for the cycle to work properly.How to Delay the Start of Cleaning (available on JKP86 models only)Press the Self Clean pad.Using the number pads, enter thedesired clean time.Press the Delay Start pad. Theearliest start time you can set willappear in the display.Using the number pads, enter thetime of day you want the clean cycleto start.Press the Start pad.The door locks automatically. The displaywill show the start time. It will not bepossible to open the oven door untilthe temperature drops below the locktemperature and the LOCKED or LOCKEDDOOR light goes off.When the LOCKED or LOCKED DOOR lightgoes off, you will be able to open thedoor.After a Clean CycleYou may notice some white ash in theoven. Wipe it up with a damp cloth afterthe oven cools.If white spots remain, remove them with asoap-filled steel wool pad and rinse thoroughlywith a vinegar and water mixture.These deposits are usually a saltresidue that cannot be removed bythe clean cycle.If the oven is not clean after one cleancycle, repeat the cycle. You cannot set the oven for cookinguntil the oven is cool enough for thedoor to unlock. While the oven is self-cleaning, youcan press the Clock pad to displaythe time of day. To return to theclean countdown, press the CookingTime pad. If the racks become hard to slide,apply a small amount of vegetable oilor cooking oil to a paper towel andwipe the edges of the racks with thepaper towel.