WARNING—TO REDUCE THE RISK OFFIRE, ELECTRIC SHOCK, OR INJURY TOPERSONS, OBSERVE THE FOLLOWING:A. Installation work and electrical wiringmust be done by qualified persons(s) inaccordance with all applicable codes andstandards, including fire-rated construction.B. When cutting or drilling into wall or ceiling,do not damage electrical wiring and otherhidden utilities.C. Ducted fans must always be vented to theoutdoors.WARNING—To reduce the risk of fire,use only metal ductwork.Important—Save for the local electricalinspector’s use.JN327JV327JV337JV347Installation Instructions forGeneral Electric HoodPower supply connection boxon underside of hood.Exhaust Outlet12″12″51⁄ 2″51⁄ 2″12″17 1⁄ 2″17 1⁄ 2″5 1⁄ 2″171⁄ 2″30″Power supply connection boxon underside of hood.Exhaust Outlet30″Exhaust Outlet Knockouts4Power supply connection boxon underside of hood.30″51⁄ 2″12″17 1⁄ 2″Exhaust OutletKnockoutsPower supplyconnection box onunderside of hood.30″For ducted installations,remove the baffle and re-installso the short side marked“VENTED” is visible. The longside of the baffle should beinside the hood.