For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.321358Specification Created 10/06Listed byUnderwritersLaboratoriesJP346WM/CM/BMGE® 30" Built-In CleanDesign Electric CooktopDimensions and Installation Information (in inches)Note: If installing with a GE Profile™ TelescopicDowndraft System, consult both cooktop anddowndraft installation instructions packed withproduct before installing. Cooktop gas/electric supplymay need to be re-routed to install downdraft.Note: Consult cabinet and countertopmanufacturer’s specs for flush mount installationprior to install.Installation Information: Requires a 5" freearea between the bottom of the cooktop to anycombustible material, i.e., shelving. Free area not required when installingwall oven underneath cooktop. Refer to installation instructions. Requiresa 15" minimum from cooktop to adjacent overhead cabinets. Units arefurnished with a 48" flexible armored cable.Before installing consult installation instructions, packed with product, forcurrent dimensional data. 36" Ribbon cooktops are approved for use over GE30" Single Wall Ovens only. 30" Ribbon cooktops are approved for use overselect GE 27" and GE 30" Single Wall Ovens. Refer to cooktop and wall oveninstallation instructions packed with product for current dimensional data.Filler Trim KitWhen replacing an old GE 30" cooktop (with larger opening) use the followingone-piece trim kit to fill in the over-size hole. Available at additional cost.JXTR32B (Black glass with black, white or bisque pattern)3-1/4*Cooktop2-1/2**Required28-1/219-5/829-3/430_color_cktp_install.eps21-3/8Electrical junction box 16" MIN.below countertop30" MIN. tounprotectedcabinetCut shouldnot interferewith cabinetstructureat front1-1/2" MIN.clearance toside wallfrom cut-out1-1/2" MIN.clearance toside wallfrom cut-out1-3/4" torear wall13" MAX.depth* Depth of unit at conduit connection location (rear) is6-1/2" on models PP980/950 and 4-5/8" on modelsPP975/972/962/945/942/932/912, JP655/356/346.**Raised bull nose countertops may require up to3/8" additional clearance to prevent interferencewith curved front.15" MIN.to cabinetKW Rating240V 7.6208V 5.7Breaker Size240V 40 Amps208V 30 Amps