For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000.JP626WK/CK/BKGE® 36" Built-In Electric CooktopSpecification Revised 4/06321350Listed byUnderwritersLaboratoriesElectrical junction box 16" MIN.below countertop30" MIN. tounprotectedcabinetCut shouldnot interferewith cabinetstructureat front3-3/4"clearance toside wallfrom cut-out3-3/4"clearance toside wallfrom cut-out18" MIN.to cabinet2-1/2" torear wall13" MAX.depthCooktop2-1/2"(min.)33-7/8"19-1/8"35-1/2" 213Note: Check local codes for required breaker sizeImportant: Maintain 5" (12.7 cm) minimumvertical clearance between the cooktop bottomand any combustible surfaces.Clearance not required when installing walloven underneath. Requires an 18” minimumfrom cooktop to adjacent overhead cabinets.Units are furnished with a 48” flexiblearmored cable.JP626 is approved for use over GE 30” Single Wall Ovens only. Refer tocooktop and wall oven installation instructions packed with product forcurrent dimensional data.If installed with a GE Telescopic Downdraft System, consult bothcooktop and downdraft installation instructions packed with productbefore installing. Cooktop gas/electric supply may need to be re-routedto install downdraft.The countertop must be at least 26” deep with a flat surface area of23-1/2” or more, front to back. In addition, other clearances to the frontedge of the countertop must be considered.This cooktop cannot be installed in countertops that cannot acceptscrews, such as granite or marble, etc.Installation Information: Before installing, consult installation instructionspacked with product for current dimensional data.KW Rating240V 7.4208V 5.6Breaker Size240V 40 Amps†208V 30 Amps†Dimensions and Installation Information (in inches)5" (12.7 cm) Min.Vertical Clearance