GE JSP46 Installation Instructions Manual

Also see for JS966: Owner's manual Technical service guide Technical service guide Installation instructions

Contents

GE JSP46 Installation Instructions Manual Manual pdf 9 page image

Position the range in front of thecabinet opening.SLIDE RANGE INTO OPENING9Installation InstructionsInstalling the RangeEE1E8Make sure that the glass whichoverhangs the countertop clears thecountertop. Raise the unit by loweringthe leveling legs if necessary.E2Push while lifting the range into theopening until the range is within 2î ofengaging the anti-tip bracketE3E4 Remove the protective trim from theside of glass. (If provided)E5 Using the adjustable pliers or wrenchcarefully screw in the back leveling leguntil the glass overhang comes to reston the counter top.E6 Then carefully screw in the front twoleveling legs (similar to E5) until theglass overhang touches thecountertop.Plug range cord into receptacle. Locatethe cord in the back of the range in amanner that will not touch or be movedby the drawer.Continued on following pageCountertopMake sure the edgeof the countertop fits flushagainst the end of theFront Control PanelE7 Carefully push the range into theopening until the counter top fullyengages the control panel. The backglass overhang should cover the cutoutopening.STORAGE DRAWERPOSITION RANGE CORDSO THAT THERE IS NOINTERFERENCE WITHSTORAGE DRAWERAdjustable Wrenchor Pliers

/ 12

Related manuals for GE JS966