GE JSS28 Installation Instructions Manual

Also see for JSP39: Use and care guide Installation instructions Use and care guide Owner's manual Owner's manual

Contents

GE JSS28 Installation Instructions Manual Manual pdf 2 page image

2Installation InstructionsPREPARE TO INSTALL THE RANGEREMOVE SHIPPING MATERIALSRemove all parts from the plastic bag foundinside the prepack of the oven and savepackaging tape.1STORAGE DRAWER REMOVALPull the drawer out until it stops.Lift the front of the drawer until the stopsclear the guides.Pull forward and remove the drawer.CBARailStop• Move range indoors in front of cabinetopening.• Protect the kitchen floor! Flatten and place apiece of the shipping carton in front of theinstallation location to protect the flooring.• Remove packing materials. Remove labels ondoor, plastic on trim and panel, and all tapearound the range.GuideStopDOOR REMOVAL (optional)Door removal is not a requirement forinstallation of the product, but is an addedconvenience. To remove the door:Open the oven door as far as it will go.Push both hingelocks down towardthe door frameto the unlockedposition. This mayrequire a flat bladescrewdriver.DO NOT LIFT THE DOOR BY THE HANDLE!Place hands on both sides ofthe door, and close the ovendoor to the removal position.This is half way between thebroil stop and fully closed.Lift door up and out until the hinge armsclear the slots.NOTE: The oven door is very heavy. Be sureyou have a firm grip before lifting the ovendoor off the hinges. Use caution once thedoor is removed. Do not lay the door on itshandle. This could cause dents or scratches.DCBAHinge clears slotHingeunlockedpositionHingeslotHingearm