GE JT965 Owner's Manual

Also see for JT965: Technical service guide Installation instructions Installation instructions Owner's manual Owner's manual

Contents

GE JT965 Owner's Manual Manual pdf 43 page image

www.GEAppliances.comLower Oven Light BulbNOTE: The glass cover (on somemodels) should be removed only whencold. Wearing latex gloves may offera better grip.CAUTION: Before replacing youroven light bulb, disconnect the electricalpower to the oven at the main fuse orcircuit breaker panel.Be sure to let the light cover and bulbcool completely.For your safety, do not touch a hot bulbwith bare hands or a damp cloth.To remove:Turn the glass covercounterclockwise 1/4 turn until thetabs of the glass cover clear thegrooves of the socket.Using gloves or a dry cloth, removethe bulb by pulling it straight out.To replace:Use a new 130-volt halogen bulb,not to exceed 50 watts.Using gloves or a dry cloth, removethe bulb from its packaging. Do nottouch the bulb with bare fingers.Push the bulb straight into thereceptacle all the way.Place the tabs of the glass cover intothe grooves of the socket. Turn theglass cover clockwise 1/4 turn.For improved lighting insidethe oven, clean the glass coverfrequently using a wet cloth. Thisshould be done when the oven iscompletely cool.Reconnect electrical power tothe oven.BulbSocketTabGlass coverReceptacleUse glovesor clothReceptacleOven Shelves and Convection Roasting Rack (lower oven)Clean the oven shelves and theconvection roasting rack with an abrasivecleanser or steel wool. After cleaning,rinse the shelves and rack with cleanwater and dry with a clean cloth.NOTE: The oven shelves and convection roastingrack may be cleaned in the self-cleaning oven.However, the shelves will darken in color, losetheir luster and become hard to slide if cleanedduring the self-cleaning cycle.To make the shelves slide more easily,apply a small amount of vegetable oilor cooking oil to a paper towel and wipethe edges of the oven shelves with thepaper towel.Roasting rackOven shelfSafety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer SupportDo not use a steel-wool pad; it willscratch the surface.To clean the stainless steel surface,use warm sudsy water, a stainless steelcleaner such as Kleen King® or anall-purpose liquid or spray cleaner.Always scrub in the direction of thegrain. Rinse thoroughly with a spongeor cloth and clean water. Dry with a soft,clean cloth.After cleaning, use a stainless steelpolish, such as Stainless Steel Magic ®,Revere Copper and Stainless SteelCleaner® or Wenol All PurposeMetal Polish®. Follow the productinstructions for cleaning the stainlesssteel surface.Stainless Steel Surfaces (on some models)43